Applying materials

Pick a material, hover a surface, click. The surface is painted.

With Paint active, Face and Edge track the surface under the pointer in 3D, plans, sections, elevations and callouts. The cue clears over empty space and when you leave the canvas. In Split, it follows the pane under the pointer.

  1. Open the Library, go to Materials and choose a category on the rail.
  2. Click a swatch. That sets your brush and arms paint mode. You can also arm it with Painting on the left toolbar, below Text, in 3D or Split. The status line reads Select a material to paint, then Hover a surface to paint.
  3. Hover a surface and click.

When the surface offers more than one scope, a control appears for the single surface, the Whole object, All matching items or the Room. While you hover the surface, each option shows its number, such as (1) and (2), and pressing 1 to 4 picks that option without leaving the surface. A roof's slots are Finish, Fascias & rainwater goods and Soffit. Painting a door, window or other glazed object as a Whole object covers its frame, leaf and hardware and leaves the glass as it was; pick the glass itself to paint it, and only the glass takes the material. Glass and frame are separate this way when the window is selected too: the brush you loaded goes on the surface you click.

  • Pick samples a surface's current material into your brush, opens the Library on that material's own category and switches to its Edit tab. It works in 3D, plans, sections, elevations and callouts, and takes the piece you clicked: a window's glass gives you the glass, not the wall behind it, and a rooflight's glass or frame gives you its own material (an unpainted pane gives you the library Glass). While Pick is armed the cursor becomes a pipette and the shelf reads "Click a surface to pick its material, Esc to cancel"; one click ends it, and so does Esc, including from a Library you have moved into its own window.
  • Erase takes paint off.
  • Reset all clears painting from the selection. Select a mass or pick one of its faces to clear every painted face of that mass in one undo step. A mass with no painted faces keeps the button disabled.
  • Scene materials lists the materials your drawing already uses, with an Add material button.

Painting further with a modifier

  • Shift replaces the clicked surface's material everywhere it appears in the model. Inside an open group or component, it stays inside.
  • Ctrl (⌘ on a Mac) fills the clicked face and every face joined to it that carries the same material.
  • Ctrl+Shift replaces that material on every surface of the clicked object.

The modifiers, and painting every selected surface by clicking one of them, work the same from a plan, a section, an elevation or a callout as they do in 3D. In a section, an elevation or a callout, a click paints the drawn piece under the pointer: a window's frame or glass, a door's glazing, or the glass of a curtain wall, railing, lift or stair guard, and the wall behind keeps its own material. A plan does the same for a window (frame or glass), a door (frame, leaf or side light), a railing (posts, rails or glass) and a curtain wall (frame, glazing or a door bay's leaf), and Pick samples them there too.

Painting a closed group sets the material for everything inside it that has no paint of its own: walls, floors, roofs, stairs, columns, beams, railings, lifts, curtain wall frames, cabinets, shelves, ceilings, chimneys, dormers, cupolas and roof vents, rooflight and solar panel frames, balconies, piers, footings, stair flights, fascias, barge boards, soffits, gutters and downpipes, door and window frames and furniture all wear it, while glazing, solar cells and glass stay as they are and handles keep their own finish. Masses and nested groups lose any paint of their own, so the group's material shows on them too, in one undo step.

Painting the ground

Lines and shapes you draw on the site ground divide it into areas: a closed shape is an area, and so is the ground between lines that cross or run from edge to edge. Hover the ground and only the area under the pointer is highlighted, in 2D and in 3D; the contours stay as they are. With a material armed, the 3D view also previews that material on the area. Click, and only that area takes it. A road or path you've drawn paints the same way, as its own surface. Lines drawn with the site plan's Drafting tools divide the ground once you press its tick; see The site plan toolbar.

  • The Site plan shows each painted area with its material's pattern, or its colour where the material has no pattern, so the plan and the model read the same. Material fills under Site in Styles turns this fill on or off.
  • A painted area keeps its material when you move its outline.
  • Each paint is one undo step, a one-off colour included.

The categories include colours, wood, marble, stone, brick, blockwork, tile, wallpaper, concrete, insulation, metal, plastic, fabric, carpet, leather, roofing, ground and glass. On a selected paintable face, Reflection and Normal strength controls appear.