Changing the display
Open Display between Project and Layers in the menu bar. Hover or click Canvas, 2D or 3D in its single column to open that row's settings beside it; building slots also offer Levels. Changing a control keeps the flyout open. Arrow keys move through the rows; Right or Enter opens the settings and moves focus in, and Left or Esc returns to the row. Esc again closes the menu, as does clicking outside. To crop a view, open Canvas and tick Crop frames under Shown, then drag the frame's edges or corners. The view crops to that region, and Crop frames controls its outline's visibility.
The settings described below live in the matching flyout: Display > Canvas for Shown, Clippers, Behaviour and Appearance; Display > 2D for Drawing, Annotations and Model categories; Display > 3D for camera and rendering; Display > Levels for levels and phases. To reach Show demolished, open Layers > Layers. Colour pickers and other windows opened from settings keep the parent menu in place.
In plan, a selected mass, group or component has a blue outline and a pale blue wash. A selected floor, ceiling, roof, room, area, plot or ground region takes the same pale wash, on the light canvas and the dark, and only on screen: a PDF, a DWG or a sheet prints without it. Hover shows an outline without the wash. A closed group or component highlights as one object; open it to select its members. Selection highlights stay on the canvas and do not print or export.

To change what the canvas shows
On a drawing view, Unhide all in view in the View range modal (the tray's Views row) restores anything hidden with Hide in view → Element or Category from the drawing's right-click menu. Hiding belongs to the current view, including its sheet drawings and exports, and can be undone in one step.
Shown has checkboxes for Grid, Axes, Measurements, Hide demolished, Crop frames, Hidden geometry, Hide model and Hide components, the last two sharing one row. Every one of them stays switchable in any view, and simply has no visible effect where it does not apply. Crop frames shows or hides the outline of a drawing's crop region, and on a section, elevation or callout window the dashed annotation crop outside it; the view crops to those regions either way. Unhide crop regions, in the 2D flyout under Crop annotations, shows the open view's outlines again after you hide one from its hover icons. If you draw something wholly outside the crop, a message says none of it is visible in the view. In a section, elevation or callout window the test is the annotation crop, so a line drawn in the margin around the crop region is shown and says nothing, while one only partly inside it is hidden and does. Show reference planes reveals your construction framework. Behaviour holds Orbit below ground. Appearance has separate Canvas and Toolbars controls, each with Light and Dark. Toolbars also changes the desktop lobby, shelves, tray, menus, tooltips and floating windows, with a short colour transition. A Clippers section holds Show clippers, which draws the section planes, and Show cuts, which applies the active clipper's cut. See Clippers.
No Display control is greyed out because of the view you are in. A setting that does nothing in the current view, such as Orbit below ground on a plan or Cut plane in 3D, still switches and saves, and takes effect when you open a view that shows it. With no section, plan or callout open, Show services, Crop annotations, Unhide crop regions, View template, the Annotations checkboxes, Model categories and the View range fields still switch: they set the drawing-wide default that views without a setting of their own follow. It is saved with the drawing, so it is there when you reopen it, and it does not carry into another drawing. An included view template, Wireframe, X-ray and Quiet density never stand other controls down: every control writes its own setting. A locked section, and a drawing that is read-only for want of a plan, leave every Display control live as well.
To focus on the component you are editing
While editing inside a component, turn on Hide components beside Hide model in Display > Canvas in the menu bar. Other instances of the same definition disappear from the 3D view and plan, including instances on other storeys and inside another component. The rest of the model stays at normal strength. Hidden instances cast and receive no shadows, and copies placed while the setting is on follow it too. Turn on both switches to show only the instance you are editing. When you enter a nested component, its definition becomes the one this switch uses.
Live component updates, in Display > 3D and on by default, makes the other placed copies of a component show a push or pull as you drag it, instead of when you commit. Turn it off if a large model slows down while you edit inside a component.
Turn the switch off, or leave the component, to bring the other instances back. Outside component editing, both switches stay live and remember your choice for the next time you enter a component. These are viewing preferences, remembered for each drawing on this computer; they do not change the model, add an undo step or travel with a saved drawing.
Most of what the Display dropdown in the menu bar sets is remembered for the drawing you set it in: the switches under Shown, the camera and style choices, Detail, Thin lines, the units and the plan scale. A drawing you open for the first time starts on the defaults, and changing one drawing's display leaves your other drawings alone. The Light or Dark choice for the Canvas and Toolbars belongs to you and follows you from drawing to drawing.
To change how plan is drawn
Floor seams and Wall seams, in Display > 3D, start On. They show the joins between stacked walls and between walls meeting end to end. Switch either Off to hide its seam lines in 3D, drawing views, sheets and exports. The choice saves with the drawing; a drawing already saved with seams off keeps that choice.
- View template: None or one of your templates, for the open level plan, section or elevation.
- Detail: Fine or Coarse, set for the view you have open, so an elevation can sit on Coarse while a section stays on Fine, and a view template that includes it sets it on its own views only. Coarse hides the layers of walls, floors and roofs. Everything else draws the same.
- Annotation: Full or Quiet.
- Wall dimensions: Faces, Centre or Stud.
- Cut plane (m) and Thin lines. Plan shadows live in the Shadows row, under Plans.
- An Annotations section with checkboxes for automatic dimensions, manual dimensions, measurements, type marks (the door, window, stair and tag marks), structural grids, room labels and stair annotations, then a closed Model categories section.
Annotation, Thin lines and the checkboxes in Annotations work on whichever drawing is open: the plan, a section, an elevation or a callout. They are saved with that view, so one level can hide its room labels while another shows them, and a callout starts from the section or plan it was taken from until you change it. A setting you have not touched on a view follows the default for the drawing. Model categories works the same way for the building itself: open it to find the categories grouped by discipline (structure, openings, roof fittings, furnishings, services). Open a group, or type in the filter field at the top, then untick a category to leave it out of that view. Anything hosted on it goes too, so switching off walls also takes out the doors and windows standing in them. Hover a row to reveal its Line weight and Colour, which replace the category's own on that view; the cross beside them puts them back. A colour too close to the paper, such as white, prints in black ink so the drawing stays readable. Wall dimensions, Cut plane (m) and Furniture shadows are plan settings: they save from any view and take effect on a plan.
View template is the first control in that list. While the chosen template includes a setting, the matching control shows the template's value and stays live. Change it and that one setting becomes the view's own: a small Overrides template mark appears beside the control, and its menu offers Reset to template. That covers Detail, Depth, Show services, Annotation, the Annotations checkboxes, Model categories and the View range fields; settings the template leaves out stay yours to change. Choose None to hand the controls back. Creating templates and applying them to views are described under "To manage view templates" at the end of this article, and the picker for sections and elevations in their properties is in Sections, elevations and callouts.
Show services, on a section or elevation, draws that view's ducts, pipes, fittings, air terminals and mechanical equipment as thin lines: cut where the section passes through them, projected beyond it, and hidden behind a wall like anything else. Once they show, you can pick, align, move and copy them in that view. The switch belongs to the view, so another section is unaffected. When the view's View template includes Show services, the switch shows the template's value and stays live; switching it makes the setting the view's own, with an Overrides template mark and Reset to template beside it. A callout follows the section it was taken from until you set its own Show services in this callout, which then wins, and a saved elevation in the Views row has its own switch too. A DXF export of the view files ducts, duct fittings and air terminals on M-HVAC, pipes, pipe fittings, traps and refrigerant lines on P-PIPE, and HVAC units on A-EQPM.
Line weights follow the scale of the view: a 1:20 detail draws heavier than a 1:100 plan. As you zoom out, screen weights ease so closely spaced lines stay legible, keeping heavier pens above finer ones. This applies to plans, sections, elevations and callouts. Thin lines remains an optional fine-line drafting aid. On a sheet, in a PDF and in a DWG or DXF, lines keep their true weights from the drawing’s pen table.
To set a plan's view range
Open the plan, then in the tray open the Views row and click Edit view range.... Cut height sets the horizontal cut above that plan's floor. Top, Bottom and View depth each take This level, Level above, Level below or Unlimited, with a typed offset beside the level choice. Enter a length in the drawing's units, or include a unit such as 1500mm, then press Enter. The fields belong to the plan you have open.
A floor plan's Bottom and View depth start at This level, with zero offset. To look further down, choose a lower level or enter a lower offset for View depth, then set Bottom to the lower edge of the main view. Fabric between Bottom and View depth draws in the lighter solid depth pen. A ceiling plan looks upwards from Cut height to Top, with View depth extending above Top.
For a reference to a lower storey, the faded floor below shows under an upper plan by default; Views > Floor plans has Floor below beside the active plan to switch it off or on. Floor below settings lets you choose Below, 2 below and further storeys, and set their opacity. This is your explicit underlay choice and keeps its own level alongside the plan's view range. A view template can supply the range for several plans; changing a field in one plan gives that plan its own value, with Reset to template available beside it.
To change how the 3D view is drawn
- Camera: Perspective or Orthographic.
- Render: Solid or Rendered. A drawing opens on Solid, which is lighter on your machine, until you pick a mode; after that Linea remembers your choice for that drawing. Pick Rendered for full lighting and shadows.
- Style: Shaded, Hidden line or Wireframe.
- X-ray, Edges and Profiles, each Off or On. Set edge colour in Styles.
- Floor seams and Wall seams, each Off or On, and both On to begin with. Floor seams hides the line where the top of a wall meets the foot of the wall above it, storey on storey; Wall seams hides it where walls meet end to end on one line. Both apply only when the two walls share a finish, in 3D, on elevations and in their exports. Both show the joins while you build; switch one Off for drawings where you would rather the pieces read as one. Modelled cladding boards and courses run on across a hidden seam, and across a shown one too. The choice is saved with the drawing.
In a browser with WebGPU, Linea draws the edges and profiles in 3D with a softer, sharper line than before. If you would rather have the earlier lines, add ?lineaLines=1 to the end of the page address and reload; removing it brings the new lines back. A browser without WebGPU draws the earlier lines. Captures, sheets, PDFs and DWG or DXF exports are not affected.
Settings, beside File in the top bar, opens a window whose Graphics category tunes how hard your machine works. Render scale is Auto, 50%, 75%, 100%, 150% or 200% of your screen's pixels; Auto draws at your screen's full pixels whenever the view is still. If frames run slow while you move the camera it steps down once, then returns to full when you stop. Fast feedback while orbiting draws at a lower resolution while the camera moves and at full resolution once it rests. Edge smoothing turns multisampling on or off. Texture cap shrinks large images and Shadow map cap lowers the sharpness of shadows; neither can go above what your graphics adapter reports. On WebGPU all three apply as soon as you change them; on the WebGL fallback Edge smoothing waits for a reload. Compressed and data textures are left at their own size. Engine details shows, read-only, which backend is drawing (WebGPU or WebGL), the adapter, its largest texture and the current pixel ratio and resolution. These settings are kept on this device, not in the model.
To control levels and phases
Levels can be Stack, Exploded or Solo. Phases shown offers Show all, Existing + new (demolished work hidden), Demolition (existing and demolished work) and New only. A site plan starts with Existing + new unless you choose another filter. A view or sheet viewport's own filter wins. Layers > Layers > Show demolished starts on. Turning it off hides demolished objects in plans, callouts, sections, elevations, sheets and exports, even in a Demolition or Show all view. Either the switch or the view filter can hide an object. Hidden objects do not snap or join a window selection. The switch is saved with the drawing and changes no object. Select one or several objects and choose Existing, Demolished or Proposed on the Phase row of Parameters. A demolished object draws red: dashed red lines in plan and a light red tint in 3D. One Undo restores the whole selection. Drawing as takes Proposed, Existing or Demolished. Phase styles, just below, sets how each phase draws on the plan, in sections and elevations, and in an exported DWG or DXF: for Existing and Demolished, pick Solid, Dashed or Hidden lines and switch Halftone and Fill on or off. Proposed always draws as it is. Reset to defaults brings back the usual look, with Existing in halftone and Demolished dashed with no fill. An Existing item draws in grey on the plan and in a section or elevation: its lines, its fill and its hatch all fade toward the paper. A Demolished item draws with dashed lines and no fill or hatch. A door or window with no phase of its own follows the wall it sits in. A PDF, a sheet viewport and an exported plan or section draw each phase the same way, always on white paper whatever the canvas is set to. In a DWG or DXF, plans and sections both put Existing and Demolished items on their own layers, named after the layer they came from with -EXISTING or -DEMOLISHED added (a hatch layer keeps its -PATT ending, so A-SECT-PATT becomes A-SECT-EXISTING-PATT). Linework you drew or imported keeps its own drafting layer in the file, written in grey when Existing and dashed with no fill when Demolished. If you turn Fill on for Demolished, walls fill like every other item. Use a clipper to cut away part of the model.
To manage view templates
A view template is a named bundle of view settings. In the tray, the Views row (directly under Filters) has two parts: View range above, with Edit view range..., and View templates below. Under View templates, the This view picker names the template the open view follows and changes it (None hands the view back to its own settings), and the row's header shows that name even when the row is shut: No template for a view without one, Follows parent for a callout that has not been given its own. Click Edit view templates... to manage them. Your templates are listed on the left, each with the number of views assigned to it. Pick one to edit it on the right. A tick beside a setting (Scale, Detail level, Depth cue, Show services, Annotation density, Annotations, Model categories, Filters, Phase filter, View range) means the template controls that setting. Under Filters, tick each filter the template applies, pick its colour, and use the eye and the arrows to set whether it shows and in what order it takes priority. A template that includes Scale sets the scale of every view assigned to it, including a view that already had its own. Pick a different scale in such a view and it keeps that scale and is marked as overriding the template; Reset to template on the mark under View template brings the template's scale back. A callout is a view with its own template and its own range: open the callout and pick a template under This view or View template, whether it sits over a plan or over a section. Until it has one, a callout follows the view it was drawn from. New, New from current view, Duplicate, Rename and Delete sit above the list; New from current view starts a template from the plan, section, elevation or callout you have open, with every setting it holds ticked and its filters listed, and Undo steps back one edit at a time. An unused template deletes immediately. A template assigned to views asks first; those views keep their own values and lose the assignment. Ctrl+Z restores a deleted template too. Templates are saved with the drawing. To put a template on views, click Apply to current view for the one you have open, or Apply to views... and tick the ones you want, then click Apply. The list is grouped under Floor plans, Foundation plans, Roof plans, Ceiling plans, Site plans, Sections, Elevations, Callouts and Sheet regions. Each view you pick follows the template from then on, so a later change to the template reaches all of them. You can also pick the template under This view in the Views row, or under View template in the Display menu, with that view open. A sheet region takes the included scale and phase filter only, because its other settings belong to the view it shows. One Ctrl+Z puts every picked view back as it was. A view assigned a template shows the template's included values, including all four View range planes and its filters. Its controls stay live: changing one sets that view apart from the template and marks it as overriding, and Reset to template on the mark hands that setting back. Clearing the assignment brings back the view's own values.
