Text and tags

Two tools on the left rail annotate a drawing: Text and Tag.

A model tag reads the element's mark or room name and updates as you edit it. Until the element has one, the tag shows what it is, such as Wall or Door. A tag is hidden by the Type marks check in Display, with the door, window and stair marks. The arrow of a tag on a wall, a curtain wall, a door or a window stays on the same point of it, measured in metres from the wall's start: move it, drag an end, change its Length, flip or mirror it, join it to another wall or split it, and the arrow keeps its place, and undo puts it back. A room tag's arrow stays where you placed it.

Select a text note, a leader or a tag and use Line style in Parameters, the same picker as lines and hatches. A note and its leader share the chosen ink. On a tag the frame and leader use the style while the lettering keeps its annotation ink. The chosen ink appears in plan, section, elevation, PDF and DWG/DXF. Choose ByLayer to clear the preset and its copied own values. Deleting a style moves its references to the chosen replacement or ByLayer, while copied own values remain, as they do on lines.

Select a text note and Text style in Parameters offers Bold, the same control as a room's Name style. Bold text draws bold on the plan, the sheet and the PDF, and is written on a bold text style in a DWG. Its grips stand clear of the letters.

Text is one tool on every drawing and every sheet. On a sheet it stays on the page and catches its drawing edges and objects.

Text placed in a plan, section, elevation, callout or sheet belongs to that drawing and never appears in the 3D view. A note placed in the 3D view belongs to the model and never appears on a plan, section, elevation, sheet or export. The two are separate, so a 3D note and a drawing note do not share anything.

Text is born with a leader. Click Text, then click three times: what it points at, the elbow, then where the words go, and type. A preview follows your pointer after each click. Press Enter or Esc after the first or second click to put the words at the pointer now, keeping the arrow and elbow you have placed; Esc before the first click leaves the tool. Typing shows in the drawing at its real size, and Esc or a click elsewhere finishes. In 3D, click a face to point at it; the pointer catches corners, edge midpoints and faces and reads the same word as the Pencil. Leader in Parameters turns the leader off before you place (one click then places the text) and on or off while you type or after placement. Switching Leader keeps the text box open, and switching it off then on again brings back the arrow and elbow you placed. The leg ends at the words themselves, on the side the elbow lies, never at the far edge of the box. Click a section, elevation or callout with Text armed and the click is Text's wherever it lands, on a wall, a datum or open paper. A Text you are typing or have selected is drawn whole even across a view's annotation boundary; once placed, the boundary cuts it and the part inside is drawn, arrow included, while a Text wholly outside is hidden. With Mirror, Move or another tool armed, the first click on a Text in those views is the tool's click. Before you place, Parameters also offers Plan (true size), which gives the text a real height in the drawing instead of a paper one, and a Line style picker; the text carries both, and the same two controls change it once it is placed. The caret sits at the end of the words as drawn. Text is available in 2D, 3D, Split, Diagram and on sheets. A wall?s Edit Profile session offers profile editing tools.

Type the words; Enter starts a new line, and Esc or a click away keeps them. An empty note is removed. Text stays armed so you can place the next one, and one undo removes a note you have just placed. To change text already on a plan, double-click it in 2D or Split, edit, and press Esc or click away.

To label a building element, click Tag on the 2D rail, then click a door, window, room, wall or curtain wall. You can also type TG to arm Tag in plan and Split only; in Split its tile shows on the rail while it is armed. Tag works in plan, Split, and in a section, an elevation or a callout window (over a plan or over a section, and one callout inside another), where the tag belongs to that view alone and the hover preview shows before you click. Place symbol also places in those views. A site slot has no building elements of its own, so Tag is offered in building slots only. Hover over the element to preview its tag before clicking. Select a placed tag and drag its grip to move the box while the leader tip stays on the element; this also works in sections and elevations. Scaling a tag with its selection scales its frame and lettering together. A tag whose element has been deleted draws nothing, and a copy of a tag does not keep the element the original pointed at.