View filters

A view filter colours or hides elements by their parameters. Give it a name and rules, then apply it to a view. Which layers a view shows is set separately, by the eye on each layer in the Layers menu, and it is also per view.

To colour 30 minute fire rated walls

  1. Open the Filters tray row in the view you want to colour and click Edit filters....
  2. Choose the 30 min fire rated walls preset, which is applied to the open view at once, or click New, name it and choose Walls under Applies to.
  3. For your own filter, click Add rule, choose Fire rating, Contains, and enter 30. Fire rating reads the wall type. Contains ignores letter case, so 30 finds 30mins.
  4. Check the match count. For your own filter, choose the filter colour beside Add to this view, then click Add to this view. The colour fills the matching elements; their lines stay as drawn. Close the window to see the drawing.

The Filters tray row lists the filters in the view, each with a swatch beside its name in the colour the view draws it in.

To colour code one plan and reuse it

  1. Set up the plan: apply your filters to it and choose each colour, as above.
  2. Click Edit view templates... in the tray's Views row, then New from current view. The new template holds the plan's settings, its filters and their colours, all ticked.
  3. To make views follow the template, click Apply to current view, or Apply to views..., tick them and click Apply. A view that follows it changes whenever the template does, and the Views row in the tray shows which template the open view follows, and changes it.
  4. A view that follows the template takes its filters, in the template's order. Change a filter in that view and it keeps its own list from then on; Reset to template on the mark beside Filters in this view brings the template's list back.

Check what matches

The window counts matching elements in the displayed view, for example Matches 3 walls in this view. A count of zero says that no elements in this view match the rules. Check the chosen categories, the parameter and its value. The count follows the drawing's crop and the elements it shows.

Choose the rules

Applies to chooses categories such as Walls, Doors and Windows. A parameter must apply to every category chosen. The parameter list includes the element's own values and its type's values, labelled Instance parameter and Type parameter. Choose All rules or Any rule under Match. With an empty rule list, every element of the chosen categories matches. Operators include Equals, Contains, Begins with, Is greater than and Has a value. A length uses the drawing's display unit, so Thickness equals 200 on a millimetre drawing finds a 200 mm wall. Rule unit lets you choose mm, m, in or ft.

Adjust the graphics

The right-hand side of the window is a stack of tray rows: In this view, Graphics, Name, Applies to, Match and Rules. Each folds with its chevron and keeps its fold between visits. Graphics starts folded, so the rules are in front of you. Cut fill colours the cut face, and Surface fill colours uncut faces. Cut lines and Projection lines each take a colour, weight, pattern or Line Style, and are left as drawn until you set them. Clear returns a colour to its drawn setting. Halftone draws at half strength, lines included. Level of detail (Coarse, Medium or Fine) draws the matching elements at that level whatever the view is set to, which is how a wall type you colour can stay at Coarse and read clearly. It starts on Inherit; click the chosen level again to go back. Medium draws a wall's layers as Fine does. Each committed change has one undo step.

Under In this view, Enabled switches the filter on or off, Visible shows or hides its matches, and Remove from this view removes its application. Move up and Move down set priority: each graphic property comes from the first enabled matching filter that sets it. Any matching filter with Visible off hides the element. Deleting a filter removes its applications from every view; undo restores them together.

Drawings and exports

Each plan, section, elevation and callout keeps its own filters, or takes them from its view template when the template includes Filters. An open section redraws when a filter or a type value changes. The view's colours follow it onto a sheet, into a PDF and into DWG or DXF. In DWG and DXF, recoloured elements carry their exact colour on their usual layers. Selection and hover retain their feedback colours.

In 3D, filters belong to the camera you are looking through, or to the model view. Surface fill colours faces, Halftone makes them half transparent, and Projection lines controls edge colour and weight. Corb uses the same filter operations: ask him to colour matching walls or hide matching doors in a named view.