Moving things
Move is the first of four transform tools on the left rail. Click Move or press M to arm it, keeping whatever you've selected. Selecting an object alone does not arm Move.
Move and Rotate currently require one selected plot or platform. With several earthworks selected, Linea says “Move one plot or platform at a time for now” and leaves them in place.
In plan, the model geometry and annotation you carry follow the pointer before you place them, including a loose mass and the parts carried by a host. In a section or elevation, model lines retain their depth as you move them across the drawing or up and down. The placed result matches the live preview.
As you carry something towards the red or green line through the point you picked up, the move catches that line without a key: it lands exactly on it, the dashed guide appears, and carrying on past it lets go. This works the same in plan, section, elevation and callout. A point snap or Alt takes precedence, and an arrow key holds a line outright. Scale's corner handle, Rotate's start bearing and target, and Mirror's line catch the line through their first point the same way.
The Distance readout shows how far the object or picked part has moved from its starting point, including a diagonal move or a move held to an axis. Type a distance and press Enter to replace the pointer distance.
A structural grid line or a reference plane in a section or an elevation moves along the view's horizontal only, by the pointer or by a typed distance, and its height stays with the levels. A grid line that runs along the view's horizontal is seen end-on there and is not offered the Move, so a typed distance does nothing to it; move it in the plan or in a view that shows it standing. A reference point or a measurement moves in both directions of the view. The distance you release at is the distance the last readout showed.
Inside an entered group or component, arrow-key nudges follow its local axes. In 3D, the vertical nudge follows its local blue axis. Nested groups and component instances carry their composed turn into the move.
Text moves with its leader: the arrow tip, elbow and words travel together in a plan, section, elevation or callout. The words stay upright and keep their paper size.
Moving, turning or copying a face carries the edges that formed it, including when you move it vertically. The preview and placed result keep the outline with the face, and one undo restores them together.
A group made from hosted elements without their hosts moves each member along its own host and stops at that host's ends. Elements on different walls follow their own wall directions. See Groups.
In 3D, Move and Copy pick up the point under your click at its height, including on an upper storey or inside a placed house. A corner marker at the destination names where that pickup point lands. The carried object's own geometry is left out of destination snapping.
During a pink outline sketch, the rail's Move and Copy tiles work on the selected sketch edges in plan and in 3D. Copy keeps the originals. In plan the arrows and the free square sit on the picked edges; an arrow carries along its axis, the square carries freely. In a wall's Edit Profile elevation, a selected hosted opening moves or copies on that wall face; see Editing a wall profile.
Select a complete house and its walls, openings, detected rooms and roof move together, keeping their heights and spacing, even across several storeys of one building. You can do this before grouping them. Doors and windows travel once with their walls, and rooflights once with their roof. Rotate and Copy use the same selection.
In 3D, with Move or Rotate armed, click an object to pick it as the operand. The pick respects closed groups and components and the group or component you have entered, just as Select does.
Moving or copying a roof carries the trusses, rafters and purlins added through its Structure section. They stay seated on the roof's structural plane.
A flight is never picked on its own: pressing one selects, and moving it moves, the whole stair. Change a flight’s run, turn or width from its row under Advanced in the stair panel. Dimensions and measurements with free anchors, reference lines and callout boundaries also take part in transforms. An annotation tied to model features follows those hosts; select the hosts with it. A callout boundary is edited in the drawing it belongs to.
A wall joined to another keeps that wall square as you drag it, in plan, a section, an elevation and a callout window: across its run, the joined wall stretches along its own line and its far end stays put. Move a whole wall along its own length and both ends travel the full distance while its neighbours stay exactly where they were. A corner becomes a T while the moved wall covers that neighbour; once it slides clear, the neighbour's end stays put and the join ends. Plan and 3D drags and typed distances follow the same rule, and one Undo restores the walls together. With nothing selected, press where two walls meet, on the corner point or on its visible outline, and drag: the wall whose run the drag follows is the one that moves, and it moves exactly as far as the pointer does along it.
A wall with no other wall joined to it goes wherever the pointer goes in plan, along its own length as well as across it, and its doors and windows travel with it. The same goes for a railing and a curtain wall with nothing joined to it.
In a wall's own elevation (Edit profile), Move edits the profile's sketch lines, or moves a selected door or window on the wall face. To carry the wall along its line, leave the Modify tools unarmed, pick the wall, then drag it. See Editing a wall's profile.
To move a selection
- Click Move.
- Click anywhere to move the selection, or pick up a vertex, an edge or a face.
- Click again to place it, or type a number and press Enter to set the distance exactly. You can then pick Move again from the rail for the next selection.
A whole object you have selected, such as a mass with all of its faces and edges lit, moves as one rigid body wherever you pick it up: from a corner, the middle of an edge or a face. Rotate, Scale, Flip and Mirror carry it the same way. Only a vertex, an edge or a face selected on its own reshapes the object; with nothing selected, picking up a corner reshapes it too.
When you pick up a closed group, its own outline does not catch the pick, so a point you click inside the group stays where you clicked it and a typed distance runs exactly along the direction you carry. The group's members still catch it.
In plan, a click on the Move square or on one of its arrows picks up the selection from that point too, and it then follows the pointer freely. Press and drag an arrow to hold the move to its axis.
One click on an edge of a flat Rectangle picks that edge. Move it, in plan or in 3D, and the face stretches with it: the edge stays part of the face, the edges beside it follow, and the corners away from it stay where they are. Tap Ctrl while you move it to place a separate copy of the line instead, and the face stays as it was.
While you are drawing or editing a floor, ceiling, roof, pad, platform or terrain perimeter outline, Move acts on that pink loop and the outline stays open. Drag an edge, a corner or a boxed run of edges, or click an edge to pick it up, move the pointer and click again to place it (Escape puts it back), and hold Ctrl or Alt to carry a copy. A vertex, an edge or a path point dragged by its grip lands on the same targets drawing catches.
In a section, an elevation or a callout window, Move and Copy of a wall, a door, a window, a beam or a floor use the same carry as in plan. Tap an arrow key to hold the leg to the horizontal or vertical of the drawing (the guide draws as you hold it), the destination snaps to the view's own edges and levels, and a typed distance runs along the direction you are carrying. A vertical lock with nothing yet to point it runs up. Drag a wall diagonally and it follows the horizontal of your pointer only, the guide riding that line; a wall never moves up or down in a section, and a drag that cannot apply in any direction says why.
In a section, an elevation or a callout window, Move and Copy also pick up a hatch or a filled region you drew there by clicking anywhere inside it, a hole in it counting as paper; a line drawn across the hatch is still the line's when you click on it. The same click works whether or not the region shows its boundary.
After a move, Move stays armed and the moved object stays selected, in plan and 3D. Ctrl+Move keeps placing copies until Escape or a typed count. In plan, section, elevation and callout an armed Move, Rotate, Scale or Flip shows its own cursor rather than the crosshair, and tapping Ctrl turns the Move and Rotate cursors to the + copy cursor. Escape cancels a live move and keeps Move armed; press it again to return to Select. With Move idle, one Escape returns to Select. An open dialog or popover closes first, except that a drag in progress above a popover (a slider, say) is cancelled before it, and a focused text field keeps Escape for itself.
Move works in plan and in 3D. A closed group moves as one object; enter the group to move its parts. It acts on the storey the selection stands on, whichever level is active. A selection in another building, or partly in one, does not move or duplicate from here: M and Ctrl+D (Cmd+D on a Mac) say why, and Duplicate on the selection bar shows the reason. Make one of its levels active and they work as usual; for a selection spread over two buildings, select what is in one. Tap an arrow key to hold the move on the red or green axis, in plan and in 3D, before you pick up or at any point while you carry; in 3D the guide is drawn from where you picked the object up. An item on a wall slides along the wall on the red or green that wall runs along, and the vertical arrow holds its place along the wall while it rises and falls; a ceiling fitting takes red and green across the ceiling, and with snapping on the held coordinate stays exactly on the line. Dragging or carrying a wall-mounted item with Select offers only the axes its wall runs along (and the vertical in 3D, unless the item has a set mounting height); a selection with a door, a window or a roof feature in it offers none. A door, a window or a roof feature slides along what it sits on, so it takes no lock. Axis locks has the detail. When you carry a wall in plan, the walls joined to its ends stay on their own lines: they lengthen or shorten and never turn. Hold an axis beside a reference plane or another snapped line and the end lands exactly where the held axis meets it, and carrying the wall back to where it began restores it exactly.
In a house turned on the site, and inside a group that is turned, Move's red and green are the house's own, in 3D exactly as in plan. The arrows of the Move handle are drawn along them, dragging an arrow or a square keeps to them, and an arrow-key lock mid-drag holds the same line. That goes for a wall dragged by its side arrow or its end grip too: Arrow Right and Arrow Left hold it on that red or green with the guide drawn, in place of the arrow's own slide. If you set the axes yourself, red and green are those, on a turned house as on any other.
In 3D, with Move armed, the selection carries its move grips. Select alone shows the selection without a Move gizmo; dragging its body starts a new selection box. Each axis has a line ending in a chevron: grab anywhere along the line or at its tip to move along that axis. A small square between two axes moves the selection in that plane, holding the plane through where you grabbed it even in an almost edge-on view. The cross at the centre moves it freely. The grips wear their axis colours (red, green and blue), turn amber on hover, stay visible during a move, and keep the same size on screen however far you zoom, and where a corner or edge of the model lies under one, the corner or edge takes the press instead.
In 3D, floors, walls, ceilings, roofs, stairs, ramps, columns, beams, items and other level-based build elements move horizontally at their existing height and offset. A snap above or below uses that point's plan position and keeps the height. To change height, choose the blue axis grip, press Arrow Up to lock vertically, or edit the element's level and offset fields. Release the lock to carry horizontally at the height you chose. Typing a distance then sets the horizontal distance and keeps that chosen height. A selection with even one level-based element uses this rule as one rigid selection, including a closed group or component with mixed contents. Masses, model lines and groups or components containing only free geometry keep their free 3D movement. Doors, windows and roof fittings keep their host rules.
A section or elevation marker inside a group follows the group, including its height. Its view, crop and depth, and the linework, notes and callouts hosted by that view travel with it. The preview matches the placed result, and one undo restores them together. While dragging a group in 3D, a snap marker shows exactly where the point you grabbed sits. An alignment guide holds whatever you are moving or placing on that line until you move far enough away to release it, and the guide you see is the one the object lands on. Pressing Escape, placing it or switching tool lets go of the hold, so the next move starts fresh.
A gutter, fascia, barge board, soffit or ridge vent moves along the roof edge it follows. Carry one onto another roof edge and it re-hosts to that edge; let go away from any edge and it stays where it was.
To place copies
In plan and in 3D, tap Ctrl (or Option on a Mac) before pressing a Move arrow or the centre square, after pressing, or while dragging. The + cursor appears as soon as copy is on, and the bar at the foot of the canvas says the original stays. Release to place the copy and keep the original; tap again before placing to return to a plain move. A wall brings its hosted doors and windows, and a closed group or component copies as one selection. The copies stay selected and one undo removes them.
Tap Ctrl (or Option on a Mac) before or after you pick the selection up and the Move carries a copy. Dragging a Move gizmo places one copy when you release, including in 3D, and leaves that copy selected. Moving by an origin point keeps placing: each click places one copy and the next follows the cursor from the same base point. The placed copy stays selected. Snapping works at each destination, near or far. Each copy is its own undo step. A railing carries and copies with the rest of a selection. A roof accessory copies the same way, and each copy lands on the roof under it.
Ctrl+Move and a typed count work on roof pieces, vents, chimneys, rooflights, dormers, gutters, downpipes, footings, piers, balconies, stair flights, guides, scans and callouts as well as on walls and floors. A copy of something that sits on a host (a window on its wall, a vent on its roof) stays on that host. Drop it over another valid host and the copy joins that one instead. Drop it where no host lies underneath and it is refused, with a message, rather than left hanging. A wall copied together with its door brings the door along, and it moves once, not twice.
To stop, press Esc; the last placed copy stays selected. After a gizmo copy, Esc closes its count entry and leaves Move ready for the next pick. To make several in one go, type a count after any copy: 5x places five copies in all, spaced as the first two were, and /4 divides that first span into four. Typing a count ends the operation and leaves the resulting copies selected, and the whole array undoes together with the copy it grew from. A door or a window copy takes a count the same way.
Copy is Move with the copy already switched on, so it works in plan and in 3D as well as in a view: arm it, click the base point, then click each place a copy should go, or type a count. Esc stops.
In a section, elevation or callout
Move and Copy carry the lines you drew in the view, and the detail components you placed in it, the same way: click one (that click is the base point), then click where it should go, or type a distance. In an oblique section, a short sideways drag follows the pointer from its first movement. Rotate also works in a section, an elevation or a callout over a section: select what to turn, click the centre, click a start direction, then click the end direction (it steps by 15 degrees; hold Shift for any angle). Groups and components use the same drawn snap points during Rotate and Scale. Ctrl at the destination of a Move copies instead. Snapping and typed distances behave as in plan, and a typed distance is measured on the drawing whatever its scale. Click the label of a dimension, measurement, tag or callout as the base point and it moves by exactly the distance to the destination. Scale and Flip choose their object as the plan does: with either armed, press an object you have not selected and it becomes the selection.
To hold the direction, press an arrow key. Up locks the view's vertical in a section, an elevation or a callout over a section; pressing the same key again releases it. The horizontal lock is Right when the section runs along the red axis and Left when it runs along the green one. In plan, and in a callout over a plan, Right and Left lock the two plan axes. The lock draws its guide and keeps the move on it until you release it. A locked layer or group is refused when you click, with a message.
With Move armed you can press on the object, drag and release to place it where you let go, or click, move and click as before. A press that does not move leaves the object carried until your next click.
A locked object, or one inside a locked group, shows no Move gizmo; it stays selectable. If the browser takes the pointer away while you are dragging an object to a new place (a gesture it takes over, say), the move is abandoned and the object stays where it was.