Title blocks and practice details

The title block carries the project, drawing number and revision. Most of it fills itself from the Project modal.

  1. Fill in Project, Client, Drawn by and Checked by on the Details tab of the Project modal in the menu bar, or straight from the Title block row in Sheet view. Both edit the same project record.
  2. In Sheet view, open the Title block row. Tick Include a title block for this sheet (each sheet keeps its own setting) and choose a Layout, Strip or Compact.
  3. Fill in this sheet's Drawing number, Workstage, Note and Date.

Project, Client, Drawn by and Checked by belong to the project (in a project folder the folder's name is the Project on every title block), so every slot prints the same. You can change them in the Title block row as well as in the Project modal or the lobby's project details: there is one value, so an edit in any of those shows in the others and on every sheet. A project's Project No. (shown in the row for drawings in a project folder) prints on its own row directly under Project, so a long project name keeps the whole width, and its Address gets a row of its own under that, and the practice's Phone and Email print under its website and address; each appears only when you have filled it in, so a drawing without them looks as it always did. The Compact layout prints the number before the project name and leaves the rest out. Drawing number, Workstage, Note and Date stay on the sheet. A field that is empty shows its hint in dim italics, which is a hint and not a value. Revision is read-only and comes from the revision register and any revision clouds on the sheet. The printed strip has cells for Project, Project No, Drawing No, Workstage, Note, Revision, Paper, Drawn, Checked, Scale, Client and Date. Click a cell on the page and the matching field in the tray takes focus.

In a model that belongs to a project on your Projects page, Client, Project No. and Address come from that project: the tray shows them read-only with an Edit on the project link, and the title block prints the project's values. Every other field here stays the model's own.

In a project folder, a drawing number that another slot of the folder already uses is held back when you finish typing it. A message names the slot, and Use anyway applies the number regardless. Numbers on other drawings in the folder are checked when you return to the window, so a number saved in another tab is caught too.

How the block is ruled

Every rule on the title block is a black hairline, and the cells sit on one grid and a rule runs the full width of the block under each row. There are no vertical dividers: the two fields of a row sit side by side with nothing between them. Text starts on one left edge. A value too long for its cell shrinks a little, then wraps onto a second line, and is only ever cut as a last resort; a date is never split or cut, it shrinks or wraps between day, month and year instead. The Compact layout follows the same grid.

The north arrow in Scale & Orientation is a thin circle with a slightly heavier line from its centre to the rim, pointing north, and an N just beyond the rim. When every plan view shares an orientation, one arrow in this panel follows project north and that plan rotation. When plan orientations differ, the panel shows no north arrow and each plan has its own beside its movable label. Sections, elevations and schedules do not add a plan orientation. A single view keeps its scale and orientation in the title block. With several views, the scale bar appears only for a shared true scale; different true scales read As indicated, with each scale in its view label. The scale bar is drawn as outlined blocks alternating black and white, with the scale written above it and the figures beneath, in metres on a metric scale and in feet on an imperial one, and it sits in its own cell so it never meets the north arrow. A fitted drawing claims no ratio or measurable bar. The page and PDF use the same rule; separately placed Symbols stay where you authored them. To turn the arrow by hand, type an angle in degrees (clockwise from straight up) in the North arrow row of the sheet's Page card in the tray. It replaces the automatic rotation on the page and in the PDF. Press Reset, or clear the field, to go back to Automatic.

Make the title block your own

The Customise controls at the foot of the Title block row change the project's title block, so every sheet that carries it updates together, and Undo takes each change back one step. There is one Line colour and one Text colour: every rule, the north arrow and the scale bar take the line colour, and every label and value takes the text colour, with the hierarchy still carried by size and weight. Reset puts a colour back to the house ink, and a project nobody has changed prints exactly as it always has. The practice logo is not recoloured.

To add your own marks, press Line, Rectangle or Field, then work on the title block on the sheet. Drag from one point to another, or click twice, to draw a line or a rectangle; Field places a live value with one click, picked from the list beside it (drawing number, client, revision, scale, date and the rest, or Your own text). What you place snaps to the block's corners, edges and rules, to the ends, corners and midpoints of what you have already placed, to the nearest point along a line, and in line with where the line you are drawing started; a small square shows what you have landed on, and a dashed guide shows an alignment. Hold Shift while you draw to hold the line or rectangle to one direction, at any moment, with the guide showing; let go to release it. A placed field is the block's own value, so it changes the moment the project's does, and text and fields always stay inside the block. A placed mark keeps its distance from the nearest edge of the block when the paper size changes, so a line placed on a rule stays on that rule. Placed marks use the line and text colours, print in the PDF and in the DWG or DXF on the Title block layer, and belong to the layout they were placed on, Strip or Compact. Press Esc to stop placing.

Click a placed mark to select it, drag it to move it (one undo step for the whole drag) and press Delete to remove it; Shift adds to the selection. A selected text can be retyped in the row, and a selected field can show a different value.

Practice details

The Practice row (and the Practice section of the Project modal) holds Add logo (it reads Change logo once there is one), a Logo size slider, Name and Copyright text. Write [practice] wherever the copyright text should carry your name and it prints as the Name you have set, on every sheet, so renaming the practice updates them all; with no name set the token prints as nothing. Your practice name, address, website and logo are saved to your account, so the same details are there in Projects and in your other browsers; the first time you open Linea after signing in, anything you had typed here that your account did not yet have is saved to it. The logo sits on the left, centred vertically between the rule under the north arrow and the rule above Project, at whatever size the slider gives it. An empty logo slot on the page is a clickable Add logo block. In a slot of a project the project's own Name, Address and Website for the practice print instead of yours when they are filled in; the logo and copyright text stay yours.