Setting up a sheet
A sheet is a page of paper with drawings placed on it. Switch the canvas to Sheet to make them. Use Export sheets from its export button or Export for DWG, with DXF as the alternative, or one PDF.
While a sheet is open, a section, elevation or callout's Views row menu can still Delete that view. Its detailing and sheet placements go with it; one Undo restores them together.
In the Views browser, the arrow beside an empty sheet stays visible. It becomes available after you add a view; pointing at it explains Add a view first.

To create a drawing sheet, click Sheet at the top left, open the Views tab, click Add sheet and fill in the New sheet window.
A new site slot starts with two empty A3 sheets, Location plan at 1:1250 and Site plan at 1:200. A new building slot starts with three, Plans, Elevations and Sections, each at 1:50. They carry a drawing number and the title block but no views, and a view you place on one takes its scale. Slots you already have are left as they are.
- Click Sheet among the icons at the top left.
- Open the Views tab in the outliner and find the Sheets group.
- Click Add sheet at the foot of the group. The New sheet window opens.
- Set the Sheet name, Drawing number, Paper size (A4, A3, A2, A1 or A0), Orientation (Landscape or Portrait), then click Create. The window does not ask for a scale: each view you place shows at its own scale. The sheet opens on the page.
The window starts from the last sheet you made, so pressing Enter makes the next one in a keystroke, and Esc makes nothing. The drawing number is the next free one in the series of the last sheet (A101, then A102), skipping any number another sheet or another slot of the folder already has. If you type a number another sheet already has, the window names it (A101 is already used by Plans) and won't create the sheet until you change it. If the sheet can't be made, for instance because the drawing is read-only, the window stays open and says why. The A series runs A4 at 210 by 297 mm, A3 at 297 by 420, A2 at 420 by 594, A1 at 594 by 841 and A0 at 841 by 1189.
To give the sheet a default scale, use Default scale on the Page card. It sets the scale for views you place from then on; views already on the sheet keep theirs.
A sheet's north arrow is drawn for you, following project north and the plan's rotation. The North arrow row on the sheet's Page card turns it by hand. Type an angle in degrees, clockwise from straight up, and the arrow on the page and in the PDF takes it in place of the automatic rotation; Reset (or clearing the field) puts it back to Automatic.
Finding and managing sheets
Right-click a sheet and open Duplicate. Duplicate Empty copies the paper setup and title block. Duplicate with Detailing adds the sheet's own annotations and ordinary images. Duplicate with Views adds its viewports too, each on a new independent view with its detailing, and copies placed renders. Every option takes the next free drawing number in the duplicated sheet's own series (S-03 gives S-04, A101 with A102 present gives A103) and is one Undo. The original views keep their original sheets; copied views show as placed on the new sheet. View references to a copied viewport follow its new view; other references keep their existing target. The new sheet has not been issued in the revision register. A legend view on the sheet is copied too: Duplicate with Views adds a new view of the same legend (a plan, section or elevation of its own) to the new sheet. Close the legend first if it is open.
Every sheet is a row in the Sheets group, listed as drawing number and name (A101 - Proposed Site Plan) in number order. Click a row to open that sheet. Double-click it, or use its menu, to Rename it: the field edits the number and the name together. Its menu, or the Delete key on the row, deletes it after asking; the views that were placed on it stay in the project and their boxes go hollow. A chevron beside a row lists the views on that sheet.
The sheet controls
Sheets are listed and switched in the Views outliner. Floating over the sheet at the top right are the zoom readout, Fit the page, which frames the page, the Sheet grid toggle, and the two export buttons. Deleting a sheet asks first, and it also removes that sheet from any revision that referred to it. Export this sheet (the download icon) opens the export dialog with only the current sheet ticked. Export sheet set (the stacked pages icon) starts with every sheet that has content ticked the first time, then reopens on the ticks and format you last chose for that drawing. In either dialog you can change the ticks and choose DWG, DXF or PDF; see Exporting a PDF.
The sheet grid
Click Sheet grid to show a grid on the paper: a light line every 5 mm and a firmer one every 25 mm, measured from the top left of the page whatever the zoom. While it is showing, moving a drawing, note, image, symbol, tag, view reference or detail line snaps one of its edges or its centre to a grid line, and a drawing you drop from the tray lands on the grid too. When a drawing lines up with another, the blue alignment guide shows, and that alignment wins over the grid. Hold Shift while dragging to move freely, at any moment of the drag. The grid is only a guide on screen: it never prints and is never in an exported PDF or DWG. Model space is unchanged.
Once you are on a sheet, the tray's rows are Page, View settings, Scale bars, Title block and Practice. The Page row changes the open sheet's name, paper and orientation after the fact. Export this sheet (the download icon) opens the export dialog with only the current sheet ticked. Export sheet set (the stacked pages icon) starts with every sheet that has content ticked the first time, then reopens on the ticks and format you last chose for that drawing. In either dialog you can change the ticks and choose DWG, DXF or PDF; see Exporting a PDF.