Exporting a DWG or DXF

Export your drawing as a DWG with real linework on named layers, ready for a consultant to keep drawing in.

A plan view's turn is saved with the view: on a sheet the view is placed turned, in the PDF and in the sheet DWG. A single plan DWG or DXF stays in true model coordinates, unturned, so a consultant gets real coordinates. A crop turned with Rotate to view cuts the same turned rectangle in every output.

A callout's own outline, bubble and leader are drawn on its parent view and not inside the callout itself: its border is the view's crop, on the canvas, on a sheet, in a PDF and in a DXF.

A wall part with its own material exports its section hatch on a layer named for that material, ending in -PATT. Your consultant can freeze that hatch independently. Parts that follow their wall layer's material keep the usual section hatch layer. See Parts.

Text exports with its leader line and arrowhead. Its paper size follows the note's text height in a plan, section, elevation, callout or sheet, as in the PDF.

Tags export with their frame, leader and chosen end style. Plan tags use their view's scale, matching a sheet placement at that scale; Tag leader ends and Tag end size in Styles carry through to PDF, DWG and DXF.

A plan with Plans shadows on (in the Shadows row) exports them as solid hatches on the shadow layer, A-ANNO-SHAD, the same layer an elevation or section shadow uses, in the light grey that black at the shadow's opacity makes over white paper, the same as an elevation or section shadow.

Roof edge lines in an elevation export on a ROOFS layer, with that layer's colour and lineweight, so a consultant can freeze them on their own.

A cut wall exports solid across its whole thickness: every layer of the cut, the air cavity and the closers beside a door or window included, sits on a paper-white mask on the A-ANNO-MASK layer, so a gridline or any drawing beneath the wall does not show through it in CAD. Freeze that layer to see what is underneath.

A room's label exports with the plan: its name and number, area and ceiling height, one line under another, as the plan and the PDF show them.

A customised title block exports as you set it: its line colour and text colour, and the lines, rectangles, fields and text you placed on it, all on the Title block layer with the rest of the block.

For whole sheets, open Export sheets from the sheet controls or the Export window. Use Select all, None or the sheet checkboxes, then choose DWG or DXF and click Export. Each selected sheet produces its own drawing in paper millimetres, with the same clipped views and laid-out notes, schedule cells and title-block text as the PDF.

A set of more than ten sheets converts to DWG a little at a time, because the converter takes ten a minute. The Export sheets window says when it is waiting and carries on by itself. If a sheet still cannot be converted, the window says which sheets could not be made, and the other sheets are saved.

A big sheet converts to DWG in the background. The moment you click Export the window says roughly how long to expect, such as "Converting A101 to DWG, about 3 minutes", and you can carry on drawing or close the window and open it again: the window still shows the conversion running, and Export stays off until it ends. When sheets are waiting their turn it says how many are ahead. A toast with a Download button tells you when the file is ready, and stays up for a minute. If you reload the page while sheets convert, Linea picks the conversions up again and tells you once how many sheets of the set are ready and which were not exported, with Download for what is ready, Try again and Export as DXF for the rest. If the converter restarts and loses a conversion, the message says so, nothing is wrong with the drawing, and Try again re-runs just those sheets, with Export as DXF beside it. When several sheets fail, the toast names them in one short line, and the Export sheets window keeps to a single line too: how many sheets could not be made and the first two by name. A sheet past the converter's size limit (a little over 37,000 lines and shapes) is refused straight away, and the message gives that limit as the reason, and its DXF, which opens in AutoCAD and is instant, is one click away; you can also split the drawing across more sheets. A single view's DWG goes the same way and usually lands in seconds.

Raster views and logos stay as image references. Their PNG files travel beside the CAD drawings in the downloaded ZIP, including when you export just one sheet. Extract all the files into the same folder and keep the PNGs with the drawing. If an image or its archive cannot be written, the export reports the affected sheet or file.

Circular arcs keep their clockwise or anticlockwise sweep in the CAD file, including arcs that cross zero degrees or sweep more than half a circle.

  1. Click Export in the File menu. The Export window opens.
  2. In the Views group, choose the view in the dropdown: a floor, ceiling, foundation or roof plan, the site or location plan, a section, an elevation, a callout or a saved orthographic view.
  3. Click DWG, or DXF for a DXF.

When you open the DWG, AutoCAD or DWG TrueView may ask you to confirm opening a drawing that was not saved by an Autodesk program. Choose Continue and the drawing opens normally.

A DWG uses the nearest AutoCAD indexed colours; a DXF carries exact authored colours. Ordinary black drawing ink follows the CAD background: black on light, white on dark. DWG is written as AutoCAD 2000 (R2000). A tile grid, brick bond or boards drawn on a face are written as one hatch for the whole face, openings included. Pattern fills (brick, block, concrete stipple, earth, cross-hatch) are written as real hatches with a pattern name beginning LINEA_, and insulation as continuous polylines, so even a large section stays a few hundred objects. A sheet export does the same: each patterned region on a sheet is written as one hatch with its pattern name, solid fills of one colour are merged, and coordinates are rounded to 0.0001 mm, so a sheet of hatched walls stays small. Importing the file back brings them in as their outlines. If the DWG cannot be made, you are told why in plain words and given a DXF with the same content instead; the file ends .dxf. Only a drawing too detailed to convert in time is described as too detailed; a busy converter says so, a device that is no longer active on your account tells you to open ArchAdemia Tools to reactivate it, and anything else says it could not be made just now. Then try the DWG again, or send the DXF as it is. A DXF export also offers Open in Vector in its toast; that one creates a new Vector document, so it needs an active plan, and the plan is checked again when you click it.

Linework you imported from a CAD file goes back out on the layers it came in on, with each layer's colour and lineweight, including a layer with nothing on it. A layer that was switched off or frozen in that file is written switched off or frozen, so a consultant opens it as they sent it.

Site boundary lines go on layers named for their type, such as SITE-BOUNDARY-RED-LINE, so a consultant can freeze one. A constraint line is in the file too; turn off Show on sheets and exports for it to leave it out. The site plan's file carries what the site plan shows: each tree's canopy and branches, the section line with its head letters, and the elevation markers.

In a plan export, a ramp's outline, slope arrow and gradient label share the A-FLOR-RAMP layer. Freezing that layer hides the whole ramp symbol.

Current view is the first choice in the Views dropdown. A ceiling plan exports that ceiling view's own annotations and crop, in the same orientation as its floor plan. A plan view you have duplicated exports to DWG or DXF with its own layers: a layer hidden in one is still in the other's file. If every layer with drawing on it is hidden in the view, the export says so instead of writing an empty file. The file is named after the plan view (for example Ground-Floor-Copy-2), as its PDF is. Use Draw plot region to draw a window over the part of that view you want; the PDF, DWG or DXF then holds only that window. On a section, the window stays inside what the section draws. If its cut line or crop has since moved so the region no longer overlaps it, the whole section is exported and Linea says so: redraw the region to export a window again. A region on a callout stays inside the callout in the same way, and one that no longer overlaps it exports the whole callout, with the same kind of note.

A plan level or a section with a crop region exports as its cropped drawing, the same area a PDF or a sheet shows. Anything wholly outside the crop is left out of the file, including a door swing whose arc lies beyond the crop. The level, grid and section markers of a section or elevation are the exception: they are written even where they sit above or below the crop. Dimensions drawn in a section, elevation or callout window are written too, on the dimensions layer. A view's annotation follows its annotation crop rather than the model crop: dimensions, symbols, notes and drafted lines wholly inside it are written, and one it cuts is left out. Model elements that cross its edge, including hidden lines, keep their true length in CAD model space. A repeating detail is clipped unit by unit: whole units stay as block inserts, and a unit cut by the path end or the view crop leaves as clipped lines and outlines.

Existing and demolished linework exports on layers ending in -EXISTING and -DEMOLISHED. Their phase styles live on those layers. Demolished outlines inherit the layer's linetype, which is dashed by default, when opened in CAD.

Line styles go with it. Each line is written with its lineweight and its pattern by name. The built-in patterns are written as the linetypes LINEA_DASH, LINEA_DOT, LINEA_DASH_DOT and LINEA_DASH_DOT_DOT, with the same dash and gap proportions the drawing shows, and each line carries the drawing's scale, so the dashes plot in CAD at the length they print in the PDF at any scale, a dash always 1 mm of paper whatever the line's pen; they come back as the same patterns. A pattern you made yourself in the Line styles manager is written as a linetype of the same name, with its dash, gap and dot lengths in millimetres on paper, so it plots at those lengths and opens in a CAD program with that name. A layer set to a line style with one of your patterns writes that linetype on the layer itself, and the lines on it follow the layer, in a section drawing as in a plan. A solid line on a patterned layer is written as Continuous, so it stays solid. A copy of a standard pattern at half or double size (such as one named HIDDEN2) is written as its own linetype at that size, for the layer and for its lines alike, and bringing that file back into the same drawing finds the copy again rather than adding another. A pattern named like a standard linetype (Center, Hidden, Phantom, Dash) is written with a number added, so a CAD program doesn't take it for the standard one. Bring the file back in and the same pattern is matched rather than added again.

View filters go with it. Elements a filter recoloured carry that colour on the element itself, on their usual layers, and a filter's weight and pattern overrides are written the same way. Elements a filter hid in that view are left out of the file; everything else stays as its layer sets it.

Curves export as arcs: a curved wall's outline, a circular or arc-shaped massing footprint, and the same curves cut in a section or elevation, are written as arc segments in a polyline (and as arc edges in a hatch fill), so your consultant can offset, fillet and measure them as arcs rather than as dozens of short straight segments. A polygon you drew with straight sides, however many, stays straight-sided. A polyline with a width is written as a polyline with that width, a tapered one with its start and end width at each vertex, and a wide arc as a curved segment of a wide polyline. DWG exports and the DXF alternative space terrain contour labels for the drawing's export scale.

Phases go with it too. In a plan and in a section or elevation, Existing items sit on a layer named after their own layer with -EXISTING added, in grey, and Demolished items on one with -DEMOLISHED added, drawn dashed with no fill or hatch. A hatch layer keeps its -PATT ending. Linework you drew or imported in a plan keeps its own drafting layer: set to Existing it is written in grey, and set to Demolished it is written dashed with no fill. Drafted entities in a section or elevation use the phase layers too, with the same halftone ink and dashed outlines as their sheet or PDF. Detail components and whole repeating units keep their block inserts and phase styling in plans as well as sections and elevations. Existing detail layers keep custom line patterns unless the phase style makes them dashed, and a drafted leader's filled arrowhead carries its phase ink too. Only phase layers used by the exported drawing are added. If the drawing has a masking region, the phase layers sit under it like any other model layer, so the mask still hides them.

The DXF-to-DWG conversion takes a DXF up to 25 MB.