Layers and line styles

Layers control how linework is drawn, hidden, locked and printed. Open Layers in the menu bar, between Display and Help. The wide panel gives each layer a long preview of its colour, weight and pattern, alongside its name, object count and controls. When linked drawings have layers, a further References row opens those groups in a flyout of the same width. Arrow keys move through the rows; Right or Enter opens settings, Left or Esc returns to the row, and Esc again closes the menu. Show demolished, in Layers > Layers, starts on. Turn it off to hide demolished objects in plans, callouts, sections, elevations, sheets and exports. It combines with each view’s phase filter: either can hide an object. Hidden objects do not snap or join a window selection. The switch is saved with the drawing and leaves every object in place.

The same Line style picker is available on selected dimensions, text notes, leaders, callouts, tags, revision clouds and setting-out datums. Picking a style copies its colour, weight and pattern onto the object and keeps the style id. Later own values take precedence. Deleting the style clears or replaces the id; copied own values remain, exactly as on a line. Choosing ByLayer in the picker clears those copied values.

In an elevation, the edge lines of roofs, fascias, bargeboards, soffits, gutters and downpipes draw on the ROOFS layer with that layer's colour and pen. Switch its eye off in that view to hide them and nothing else.

To make a layer and draw on it

  1. Click the plus button (Add layer) to open Layer properties. Enter a name and choose a colour, then click Save layer. Your new layer becomes current; Cancel leaves the drawing unchanged.
  2. Draw. What you draw next lands on the current layer. To change which is current, click the round button at the left of another layer's row (Current layer).
  3. To move something that's already drawn, select it and choose the layer in the Layer section of Parameters. Every kind of object has one: walls, doors, windows, floors, roofs, furniture and masses as well as lines and shapes. Select several and it reads Varies where they sit on different layers; choosing a layer moves them all. If the object or the layer is locked, Linea says so and nothing moves.

Every drawing starts with 0, Linework, Setting out, Annotation, Hatch and Reference, before you draw anything. New lines start on Linework. Opening an older drawing adds only missing default names and keeps your existing layers and their settings. A default layer you remove returns the next time you open the drawing.

To change how a layer looks

Click Layer properties, between the eye and padlock. The modal holds Name, Colour, Line style, Line weight, Line pattern, Hatch edge style, Hatch fill line style, Draw order, Opacity and Print. Line weight is a plain 1 to 10, the same scale as a pen, and each step is a real AutoCAD lineweight, shown beside the number: 1 (0.13mm), 2 (0.18mm), 3 (0.25mm), 4 (0.30mm), 5 (0.35mm), 6 (0.40mm), 7 (0.50mm), 8 (0.60mm), 9 (0.70mm) and 10 (1.00mm). A layer at 6 draws the same line as a pen at 6, in the plan, on a sheet and in PDF and DWG; patterns are Style's own, Solid, Dash, Dot, Dash dot and Dash dot dot, plus any you have made. Choose By background (colour 7) for contrasting ink on either canvas and black on paper. A Line style is a preset: choosing one fills Colour, Line weight and Line pattern in one go, and each field stays editable. Hatch edge style and Hatch fill line style are what a hatch on this layer draws with unless it has its own styles; None (hatch default) leaves the usual look. Change a field afterwards and the modal says the layer is modified from that style; saving then keeps your fields as the layer's own values. Save applies the whole edit in one undo step; Cancel discards it. Layer 0 keeps its permanent name. Setting out is a drawing aid, so a new drawing starts with its Print switch off: it shows on screen and stays out of sheets, PDF, DWG and DXF until you switch Print on for that layer. A drawing that already has a Setting out layer keeps its own setting.

To use a line style

A line style is a named colour, weight and pattern, kept with the project and shared by every drawing in it: a style you make in a building slot is there in the site slot, and an edit or a delete in one is seen in all of them. A drawing that is not in a project keeps its own. Linea starts you with Thin Lines, Medium Lines, Wide Lines, Hidden Lines, Overhead, Centre, Demolished and Beyond, plus Red, Blue, Orange, Green, Magenta, Black and Grey for marking up detail. Every one reads against both the light and the dark canvas.

  1. Before you draw, open the Parameters row of the Line tool (the same setting serves the B-spline, rectangle, circle, arc and cloud) and choose a style in Line style. Everything you draw next carries it. the Line tool, the Region tool and the Dimension tool each remember their own style, so choosing one for hatch boundaries leaves your lines and dimensions as they were.
  2. The same Line style sits in the Parameters row of the Region tool, where it styles the hatch boundary (its line, weight and colour); the hatch pattern and the fill colour of a filled region stay their own. The Dimension tool takes it too, so the extension lines, the dimension line and the ends of a drawn dimension all draw in the style. Each of the three keeps its own pick when you switch between them and when you reopen the drawing.
  3. To restyle something already drawn, select it and choose a style in its Line style field. A hatch boundary or masking region is linework, so it works the same way. A hatch has two parts you style on their own: Edge style for the boundary, which applies to every fill type, and Fill line style for the hatch lines, which needs a pattern fill (the row stays in place but greyed out for solid and masking fills, and keeps whatever you chose). Each sits in the hatch's Parameters, and in Layer properties as Hatch edge style and Hatch fill line style. The layer's pick applies to a hatch that has no look of its own: a hatch you gave its own line style, colour, weight or pattern keeps it, and an Edge style you pick on the hatch beats that. Choosing None (hatch default) hands a hatch back to its layer.
  4. Choosing a style copies its colour, weight and pattern at once, and each can still be changed afterwards. After choosing a style such as Orange, set Pattern in the Line tool's Parameters to Dash and the line draws orange and dashed. A pattern chosen after the style is shown as your own pick, and it never makes a new style. The same two picks sit in the inspector of a drawn line, symbol, detail component or repeating detail, and in the Detail line style and Detail line pattern fields on a sheet.
  5. On a sheet, select detail lines and choose a style in Detail line style at the foot of the Sheets row.
  6. On a layer, open Layer properties and choose its Line style. The colour, weight and Line pattern fields below it fill in from the style and stay editable. If you change the colour or weight the layer reads Modified from the style, and the style stays attached when you save and reopen. Anything left on ByLayer follows the layer; objects with their own colour, weight or linetype keep their overrides.

ByLayer is always the first choice in the list. A line set to it uses its layer's style, then the layer's own colour, weight and linetype. Each swatch in the list shows the line's colour and weight. A long dash pattern shrinks to fit a complete cycle into the short preview; the drawing and exports keep the pattern's true scale. With the list open, the arrow keys move through it, Enter picks, and Escape closes the list and nothing else. The list also closes when you click anywhere else or move focus to another control, and after that the keys belong to whatever you moved to. When the window is too short to show every style, the list scrolls and keeps the highlighted style in view.

To make or change a style

Choose Edit styles... at the foot of any line style list to open the manager. Line styles lets you add a style, rename it, duplicate it and delete it, and set its colour, weight and pattern. Changing a style redraws every line that uses it, in plan, section, elevation and callout alike. The built-in styles can't be edited, so duplicate one to make your own version. If you delete a style that lines use, Linea asks what they should use instead (or ByLayer) and moves them in one step, so nothing is left pointing at a style that isn't there, in this drawing and in the other drawings of the project when you next open them. The whole change is one undo here.

Line patterns holds the dash patterns. Make a pattern from dashes, gaps and dots in millimetres on paper; a dash of 0 is a dot. A long pattern shrinks to fit the preview so you can see its dashes, gaps and dots. The drawing and print keep the true lengths.

Wherever a line style is picked (a line's properties, a symbol, a detail component, a site line, the drawing tray's line tool, the sheet's detail lines, or a layer's or view filter's line), a Pattern pick sits beside it. Colour and pattern are chosen separately: pick a red style, then a dashed pattern, and the line is red and dashed. Either pick can come first, and neither makes a new style. On a layer or view filter, picking a style fills in its colour and weight as editable values, the pattern stays as you set it, and if the values stop matching the style the row says Modified from the style's name. A line in a DWG or DXF export keeps its own colour, even on a white (colour 7) layer.

To hide, lock or stop printing a layer

On the layer's row, the eye is Hide layer and the padlock is Lock layer. Each toggles back. The eye belongs to the view you are in: it shows or hides the layer in that plan, section, elevation, callout, Site plan, Location plan or 3D view only, and every other view keeps drawing it. In the view where it is hidden you cannot pick it, snap to it or use it as an alignment guide. Hide a layer in the Ground Floor plan and it is still in the First Floor plan, in your sections and in 3D; a saved 3D view and each camera hold their own. A layer you add later shows in every view. A sheet viewport follows the view it shows, so the layer is off the sheet, the PDF and the DWG or DXF only where it is off in that view. The Site plan and the Location plan each hold their own, on a sheet as in the app. A view you duplicate starts with the same layers hidden, and a view template that includes Layers sets which layers its views show. Drawings that had a layer hidden before keep it hidden in every view until you show it in one. The padlock and Print are not per view: they apply to the whole drawing. In Layer properties, turn off Print to keep the layer visible while drawing but omit it from sheets, PDF and DWG/DXF. Draw order runs from 0 to 100 in steps of 10 (default 50): higher values draw later in plan and on sheets. The drawing's annotation passes and editing handles keep their place above model ink. Opacity runs from 0 to 100% (default 100%) and fades the layer's lines and fills in plan, on sheets and in PDF. DWG/DXF keeps full colour.

To remove a layer

Click the bin (Remove layer). A layer with nothing on it goes at once. If objects are on it, Linea asks first, and they move to layer 0 rather than being deleted; one undo brings the layer and every object back.

Open Layers > References for layers from linked drawings, grouped under each reference's name. Their Layer properties modal is read-only: edit properties in the source drawing. Hide and Lock remain available here.