Importing an IFC model

Bring in an IFC model from another tool as a new building of Linea's own walls, doors, windows and levels. The file is read in your browser.

In the desktop app, File → Import opens your computer's file picker directly. Choose the IFC file there to reach the same building summary and Add to drawing steps below.

Each imported building arrives as one closed group. One click selects the whole import; enter the group to work on its parts. Members stay on their own storeys, including a frame spanning several storeys. Undo removes the whole import in one step. Room boundaries and heights are read from the IFC spaces. A clear ceiling height the file states for a room is kept as set on that room; where the file states none, the room reads the ceiling over it, else the slab above, else its storey. Groups inside the file keep their imported members, including nested groups on the same storey. An empty group with a storey assignment stays on that storey.

Walls and floors with tessellated or faceted bodies can come in from their mesh when no swept outline is available; beams use the same fallback. Imported walls and floors are snap targets for drawing and moving in plan and split view. The summary lists objects left out, so check it before adding the building. It also says what came in changed, in these words: "1 opening could not be read; the floor is imported without it" for an opening that could not be cut (an opening that overlaps another, or runs past the edge of its floor or wall, is counted the same way; one that sits inside another opening or inside a hole the floor already has is not counted, because the material is already gone there), "2 roofs came in with their notches and hollows filled in" for shapes that were simplified, "1 part of the floor had no readable shape and was left out" for a piece of a body with no height or outline, "1 part of a curtain wall or other assembly was left out because its shape is too detailed to read" for an assembly part, and "2 walls came in at the standard thickness because theirs could not be read" for a wall that came in at the standard height or thickness, and "some openings on this floor could not be counted" when a floor's openings could not even be listed. IFC files exported by Linea carry native element data, which a compatible Linea build uses to restore the element fields. Files from other tools use their body geometry: single-plane roofs become roof segments, a roof with more than one plane (a gable cut as one body) comes in as a solid of its true shape, roof cladding comes in as a roof of its own, and a roof with no body of its own is built from the parts aggregated under it, with the summary saying which form each roof took; stair flights use their riser and going values where supplied, and floor, ceiling and room outlines keep concave corners. Floor and ceiling mesh outlines retain voids. Ramps, lifts, straight structural grid axes, zones grouped from rooms and footing bodies also come in. Heating and cooling equipment comes in as a cabinet sized from its outline, so duct collars standing proud of the cabinet count towards its size, and air terminals come in as the face you see. Duct, pipe and refrigerant liquid line runs come in along their route with the section read from the body. Duct and pipe fittings, traps, solar panels, refrigerant linesets and wall parts come back with their type, sizes, angles, grid, tilt and layer from a file Linea wrote, because Linea writes those alongside the geometry in property sets of its own named Pset_Linea, next to the standard IFC data. A file from another tool brings in what standard IFC states: a fitting's type as a bend or a junction (standard IFC says only junction, so a tee, wye or cross comes back as such only from a Linea file), a pipe fitting's diameter, and a part's layer, found by matching the part's own material layer against the layers of the wall it belongs to. Duct fitting sizes, angles, a solar grid and tilt are not in standard IFC, so a duct fitting from another tool takes default sizes and a solar device comes in as one panel of the area it states. A component you made but never placed travels in the file as well, and lands in your project with the building. A file exported by Linea restores fittings, traps, solar panels and linesets with their settings too, including a trap's diameter and a lineset's two sizes and whether its suction line is jacketed; a trap from another tool comes in as an ordinary pipe fitting. A Linea file keeps each placed component as one shared definition with all its placements, and a second import of the same file makes its own definition. More complex roof surfaces and wall outlines remain limited, so check the import summary and the model.

  1. Click Import in the File menu, then Building (IFC), and pick an .ifc file. A spinner shows what it is doing, such as Reading the file with the megabytes done, then Building walls with a running count, and Cancel stops it and adds nothing.
  2. Check What we found: a summary of buildings and levels, then walls, doors, windows, columns, floors, stairs and flights, roofs, ramps, lifts, structural grids, rooms, zones, footings and curtain walls where present (a curtain wall described by its plates and mullions comes in as a group of those actual parts when every decomposed child is represented; a partial decomposition keeps the parent). If the file has elements but no storeys, they are placed on one generated level and the summary says so. Under it, Left out says in plain lines what did not come in and why, with a count for each: for example windows that overlapped another window in the same wall, curtain walls with no geometry Linea can read, and other objects that are not imported.
  3. If it looks sideways, click Landed on its side? Try the other orientation.
  4. Click Add to drawing. Placing it on your site counts the nodes placed while the page stays responsive. Cancel rolls back the partial import. On a large building, Building the model then counts the walls while they appear. Only when building finishes does the panel confirm Added to your model.

IFC site coordinates and IFC4 map conversions keep the building's real location and turn. A site without a location takes the IFC location; an already located site keeps its location and places the new building at the relative offset. The level datum comes from the file's reference elevation. Grid coordinates take priority when the file's latitude and longitude disagree by more than 100 m, and the summary says so. A file with no site or location sets no location. Other projections need latitude and longitude supplied by the file, or a site already on the same grid; otherwise Linea reports that it cannot locate the import. Column and beam sections read their stated dimensions, hollow faces and roll; material comes only from the associated IFC material name. A section shape does not establish its material. Nominal section faces simplify fillets and slopes, so check detailed fabrication geometry in the source model.

Each IFC wall comes in as its own wall, including short walls and nearby layers. Plates, curtain panels and proxies retain their 3D faces as mesh objects when the complete scene fits the save limit. Adjacent coplanar triangles are combined where they form one unambiguous boundary, and unused interior vertices are removed. Solid rectangular upright members and mullions become columns, and solid rectangular horizontal members become beams; other members come in as mesh objects or bounding masses. Linea measures the complete imported scene against its 16 MB save limit. When needed, the largest mesh parts come in as bounding masses oriented to their footprints until the scene fits. The drawing you are adding to counts too: if the drawing plus the building would be over the limit, nothing is added and the message gives both sizes in MB, so import a smaller selection or import the model into a new drawing. The summary reports each class read from its 3D shape, how many came in as mesh objects, and how many came in simplified with the budget reason under Left out. Walls and floors the file only describes as a solid shape are read from that shape; the summary counts them. The building is added beside what you've drawn, as a new building on your project's site. Doors and windows keep their link to their walls. After adding, Landed on its side? Re-import with the other orientation removes the buildings just added, counting Removing the previous version as it goes, and imports again the other way up. It waits for the walls to finish building before it says Added to your model, as the first import does. If a re-import fails or you cancel it, the previous version stays exactly as it was and the panel shows the reason with the re-import button still available. Choose a different file goes back before you commit.

Choose an IFC file up to 100 MB. Linea reads the file in your browser. A file with a building but no storeys or elements in it, which Revit produces when you export only the elements visible in view from a view with nothing showing, is refused with a message and nothing is added. Export from a 3D view with the model visible instead.

A wall that can't be read is left out and counted in the building summary with the reason, and the rest of the file still comes in. If the import itself stops, the message names the step it stopped on, such as building walls. If the browser's reader goes quiet for two minutes, Linea stops it and says where it got to, naming the wall it was on so you can find it in the source model. A wall's length, thickness and height are read from the shape the file states for it, however many openings it has, and a wall drawn along an arc comes in as a curved wall, one wall for each segment of a mixed line-and-arc wall. A floor or roof whose opening cannot be read comes in without that hole, and the summary says how many openings it left out. A part of an assembly (a curtain wall's plate, say) whose shape is too detailed to read is counted under Left out and the assembly comes in without it. A floor whose body is several separate pieces comes in as one floor for each piece. A link between objects that cannot be read is counted under Left out and the rest of the file still comes in. If the reader runs out of memory, the import stops and says so. Cancel works at any point.