Moving the camera

Move around with the mouse, or arm one of the navigation tools on the left rail.

Zoom, pan or orbit during a live gesture and its start points, locks and unfinished text stay in place. The preview follows the pointer in the changed view, even while the pointer is still. With Pan or Zoom armed, Esc returns to the live gesture. Press H again to leave Pan, or Z again to leave Zoom; clicking the active rail button returns too. The resumed tool keeps its usual Escape steps.

While Pan or Zoom borrows a live gesture, the original tool stays lit on the rail beside the active navigation button. The cursor is a hand for Pan or a magnifier for Zoom, and the status hint offers Resume the live gesture.

Each plan, section, elevation, callout and wall elevation remembers its own pan, zoom and rotation on this computer. Plans remember each storey separately. A view fits automatically on its first opening (a section, elevation or callout fits the model it draws, and Zoom extents there fits the same extent); returning to it, switching between 2D, 3D and Split, or editing geometry keeps the view where you left it. A drawing always opens on its floor plan in 2D, on the last active level if it still exists. Refreshing brings back a view remembered with the saved plan content, or fits the loaded content into the clear canvas area. Opening another view yourself brings back its framing. Use Zoom extents whenever you want to fit a view yourself.

When you open a site slot, the camera waits for the site and placed houses, then frames them once. Later model updates keep the view where you put it; use Zoom extents when you want to frame it again.

Switching to 3D frames everything you have drawn, wherever it sits, and does so on every switch until you move the 3D camera yourself (orbit, pan, zoom, a standard view or Zoom extents). It is the same view Zoom extents gives. A drawing with nothing in it yet stays on the default view, and the frame waits for the first switch that finds something. A camera you have not moved is not saved with the drawing, so reopening it frames the model again; one you orbited or set from a standard view comes back as you left it. A drawing saved earlier with a camera that sees none of the model reopens framed on the model.

In 3D

  • Drag with the middle button to orbit. Hold Shift as well to pan.
  • Scroll to zoom toward the cursor.
  • Right-click opens the context menu.
  • Arm Orbit, Pan or Zoom on the rail, or press O, H or Z, and the left button does that job. Orbit: drag to swing the camera around the model. Zoom: drag up and down. Pan: drag to slide the view. H and Z keep a command's live gesture in progress. Navigation stays armed after you release the key or mouse; Esc, the same H or Z key, or its active rail button returns to the command. With no live gesture, arming navigation disarms the editing tool. Hold Space and drag to pan without changing tool.
  • Zoom extents fits the whole model into the view, including every storey and when an object is selected. Shift+Z does the same. Use Zoom to Selection in the command palette to frame the selected object.
  • While a clipper is cutting the model, orbiting about the cursor treats what has been cut away as not there; see Clippers.

In plan, section, elevation and callout

A plan waits for the loaded drawing and fits its content once when it opens. This includes saved drawings away from the origin and drawings whose earlier view was remembered while empty. The fit uses the clear area between the top controls and the bottom build bar. A view remembered with the saved plan content keeps its pan, zoom and rotation on reload. Releasing a fitting chevron, wall grip or Move keeps that framing, on every storey. Use Zoom extents to frame the drawing again after extending it, or pan and zoom to choose your own view.

Drag with the middle button to pan, hold Space and drag to pan, or scroll to zoom at the cursor. Pan (H) and Zoom (Z) on the rail use the left button: drag to slide the plan or drag up and down to zoom. Rotate view navigates these 2D drawings, including the plan pane in Split; in 3D use Orbit. Rotate view and Orbit 90° turn the plan; each press of Orbit 90° turns it a quarter turn. Zoom extents works in every view, and on a sheet it fits the sheet.

  1. Arm Rotate view and click the origin. It snaps to points, including imported map linework.
  2. Click a reference direction, such as a boundary edge. The rubber band snaps to points and the direction of the line under the cursor.
  3. Move to preview the turn, then click the target direction. The turn steps by the Rotation snap amount, as Rotate does, and the readout shows the angle as a number; Off leaves it free. Within a few degrees of an axis, the target catches it exactly. For an exact value, type an angle and press Enter.

The usual arrow locks and Shift inferred lock work before the first click and during either leg. During a leg, their guides stay on the reference direction and end at the current pointer point, including in a callout window over a plan. Esc steps back one click. Rotation changes the view; text, dimensions and symbols keep their existing upright rules, and the north arrow follows the view. Click the compass (Align view to north) to reset rotation.

With Rotate view armed, Parameters shows View angle from north, the current absolute clockwise angle. It updates as you rotate. Type a value and press Enter to set it, or choose Reset view to return to north up.

Start Rotate view during a Line and its angle owns the input box while you aim. Finishing the rotation, or pressing Esc, returns to the Line with its draft, held lock and unfinished text. Escape on Rotate view by itself keeps the step-back behaviour above.

Perspective or orthographic

Open Display in the menu bar, then hover or click its 3D row. Camera in the flyout switches between Perspective and Orthographic. The label at the top right shows which one you're in.

The navigation group reads Orbit, Pan, Zoom, Zoom extents, Place camera in 3D and Split. Walk is the button at the top of the tray's Walk row: it takes you into the model in first person, and a hint on the shelf tells you how to leave. Walk and Place camera remain available from plan too.

While you're looking through a placed camera that is locked, whether on its own, through its layer or because a locked group holds it, orbit, pan and zoom leave the view where it is and a note says the camera is locked. Unlock it from its row in the Views tab to move it.