Filleting corners
Fillet rounds the corner between two lines, a line and an arc, or two arcs with a tangent arc. It works in plan and in a section, an elevation or a callout window.
A polyline or an arc that came in from a DWG or DXF with a width, a taper included, keeps it when you fillet one of its corners. The new corner arc takes the width of the wide side it meets, and runs from one side's width to the other's when both are wide.
Fillet also rounds two profile sketch lines in a wall's Edit Profile elevation, in either pane. Selecting Fillet while an opening is picked clears the opening selection and arms the sketch gesture.
This planar tool refuses free Pencil linework that carries vertex heights, with a message explaining why. Move and Rotate keep those heights.
- Click Fillet on the left rail.
- Type a radius first if you want it exact. The radius is measured on the drawing, whatever its scale. With none, the corner is sharp.
- Click the first line or arc. It stays blue and dashed while Fillet waits for the second.
- Click the second line or arc. The corner is made. Two lines you had already selected still fillet on Enter.
The arc and the trimmed lines are one undo step, and in a view they belong to that view. A message tells you when the lines are parallel or the radius doesn't fit the corner.
With an arc in the pair, each shape keeps the end farther from the corner nearest your pointer, so rest the pointer at the corner you mean before you press Enter. Both are cut back to the points where the new arc touches them. A radius of zero joins them in a sharp corner.
In the middle of a floor, ceiling, roof, pad, platform or terrain perimeter outline, Fillet rounds a corner of the pink loop. Type a radius and press Enter, then click the two edges at the corner. Each edge keeps the side you clicked, and the new arc becomes an edge of the outline. It works between two straight edges, or a straight edge and an arc, and a message says when the radius is too large. The new arc takes its place at the corner in the outline's order. One undo step.