Select and Walk

Select is at the top of the left rail, beside Measure; on a sheet the rail holds Select alone. Walk is a button at the top of the tray's Walk row.

In 3D, Select gives your work priority over fetched site context under the pointer. A block behind a fetched tree canopy still lights up and takes the click, including the face under the pointer. If several of your objects are there, the nearest wins. With no work behind the canopy, the imported tree group keeps the pick. Fetched context remains available in the outliner.

In a site plan and in 3D, the same selection rule applies to plots and platforms: Ctrl (Command on a Mac) adds, Shift toggles, Alt removes, and Shift+Ctrl removes. A plain click replaces. A linked building held by a plot selects that plot; a placed house can be selected alongside a plot. A marquee over those earthworks selects the same set.

In plan, click a floor's boundary line to select it. A wall sharing that edge takes the first click. Inside the floor's outline, a click reaches the room, furniture or empty canvas. Once a floor or ceiling is selected, pressing anywhere inside its outline and dragging moves it (a floor and ceiling selected together move together, as one Undo step); a drag that starts on empty canvas draws the selection box, and so does a drag inside a floor that is not selected.

Where objects overlap under the pointer, such as a floor edge beneath a wall, hover lights the top one. Press Tab and the highlight moves to the next object under the pointer (wall, then the loop of walls joined to it end to end at their corners, in plan, section and 3D, never a wall that only meets the middle of one of them, then floor, then room, then back to the wall); the snap label beside the pointer names what is lit, and a click selects whichever is lit. Move the pointer more than a few pixels and the cycle starts again from the top. This works in plan, section, elevation, callout and 3D. If an object under the pointer is already selected, or a wall chain is up, Tab keeps its usual job there.

Anything hosted on a wall (a door, window, pier, footing, balcony or wall-mounted item) is picked on its own, even when the wall is already selected: a click selects it alone and a drag moves it. With more than one thing selected, or inside a closed group, a drag on it still moves the whole selection.

Dragging a corner grip previews the reshape before you release. One Undo restores the object as it stood before the drag, including an older object's original-pose record.

Press Escape during a grip drag to put the shape back. The object stays selected when you release the pointer, even over another face, so you can take the grip again.

While you drag a selection window in a plan, section, elevation, callout, the 3D view or inside a pink outline sketch, what the release would select lights up as you draw: a window takes what lies wholly inside it, a crossing takes what it touches, and a closed group lights whole. On a site, only a window takes the ground; a crossing over buildings leaves it behind. Escape lets go of the window and nothing is selected.

Selecting a whole object keeps the Select pointer and does not arm Move or show its gizmo. In 3D, Select only selects: dragging over a selected object starts a new selection box. To move it, click Move on the rail or press M. Reshape grips, such as a wall end or a face grip in face mode, still work when you deliberately press them.

In a plan, section, elevation or callout, press an object's body and drag to move it. An unselected object is selected first. Closed groups and components move as a whole, including those made from masses. The geometry follows the pointer live, with the same snaps and snap labels as Move. Release to finish one undoable move; Select stays active. Hovering or clicking without dragging starts no move. Press a reshape grip to reshape instead. Where an object's move dot and another grip sit close together, such as a stair's UP label beside its dot, a press takes whichever is nearer the pointer, and a drag from the dot moves the object by the distance the pointer travels. Drag a locked object and it stays put while a message names what is locked and what to unlock, in the plan and in each of these views.

A selected object draws a round move dot. With Select active, a Corner of another object that lies under that dot still shows its Corner cue as you hover, and a drag that begins within the dot starts from that Corner, so the object lands on the Corner you drop it at. Once the cue has caught a Corner it holds it a little past the point where it caught, so it does not flicker at the edge; hold Alt to start from the pointer instead. With a drawing or modifying tool armed the tool takes the press and the dot stays drawn.

Inside an entered group or component, Ctrl+A includes hosted objects too, such as doors and windows in walls and fittings on a roof. A nested group or component that remains closed still selects as one object, including when you catch it with a window or crossing selection inside the outer group.

Three keys change a selection instead of replacing it, in every view. Ctrl (Cmd on a Mac) with a click or a box adds, Shift adds what was not selected and takes out what was, and Alt takes out. Faces, edges, a selection box and the edges of an outline you are editing follow the same three keys. While one is held, the Select pointer wears a plus, a plus over a minus, or a minus beside it. Shift or Alt on a selected face or edge takes the whole object out, a flat face with its edges together. Rooms and terrain follow the same rule and keep the other objects you have selected. In 3D, you can start with a room and add building geometry, or pick the geometry first and add the room. A site with no terrain selects its boundary rather than a Toposolid.

A selection stays until you clear it. Moving between plan, section, elevation, callout and 3D, picking another level, opening another floor plan from the Views list and cycling levels with Ctrl+Up and Ctrl+Down all keep it, and every view that draws the object shows it selected. Click empty space to clear it. Press Delete with something selected that the view in front of you does not show, and Linea asks first and says how many of the selected objects are out of sight; Undo restores them together. Something you picked by its row in the Outliner is the exception: Delete removes it at once, even in a plan that does not draw it (a ceiling, for one), and Undo brings it back. A sheet, a dialog or a floating window such as the Asset Library takes its own keys, so Delete there leaves the model alone.

With two or more things selected, the selection bar offers Duplicate, Copy to level and Group, whichever level is active and wherever the things sit. An action that cannot run for that selection stays on the bar greyed out, and hovering it says why: a locked member, or a picked face or edge that is not a whole object.

In 3D, a selection box includes loose model lines and curves. A window drawn fully around a free arc selects it. Closed groups and components select as a whole; enter one to select its contents. While editing a component, its containing group is not selected alongside those contents.

When a group or component is placed more than once, hovering highlights the copy under the pointer. While you edit inside a copy, its selected elements are highlighted there, including on another storey. Entering a different copy or leaving it moves that selection highlight with the editing context.

In a plan, hovering a closed group draws one outline round the whole group, in place of a highlight on each member. Enter the group and its members highlight one at a time again. A kitchen or bathroom fitting still lights every unit.

A flat face and the lines drawn around it are one object. Click the face and Parameters shows the face, with its base level and material. Click it again to select the face and its edges together, and a third time to select everything connected to it. Parameters then reads as the one face, never as a count of separate lines, and Move, Delete and Undo treat the face and its edges as one. A face clicked once and deleted goes alone, whatever shape it belongs to: its edges stay as ordinary lines that you can select, snap to, rub out with the Eraser or use as a Follow Me path, and one Undo brings the face back. Click an edge, then click it again to take the faces it borders, and a third time for everything connected. Inside an entered group the selection stays inside the group. A flat shape divided into several faces, such as a rectangle with a circle drawn across its edge, is picked one face at a time in the plan and in 3D: the face under the pointer is painted in the plan, a second click takes it with its own edges, a third takes everything connected, and Delete removes that face alone while the others stay. One Undo brings it back.

Select

In a plan, a click on the outline of a loose block selects that one edge, as it does in 3D. With Move armed, any base click then carries the edge and the flat face stretches with it while the far edge stays put.

Lines, arcs and polylines are picked on the line itself. A click inside a closed polyline that has no fill selects nothing; click the line to select it.

A click keeps the object selected even if the view takes a moment to respond. With Select active, a later click on empty space clears the selection; releasing the click that picked the object does not clear it.

Click Select, or press V, and the pointer picks: click an object to select it, or drag a box to select several. In a plan, section, elevation, callout or in 3D, dragging left to right selects only what sits wholly inside the box, and dragging right to left selects anything the box touches. A box picks what a click would: a closed group is taken as one, and a drag left to right takes it only when all of it sits inside the box. A roof or a stair is taken for any of its segments. In 3D the box picks everything visible on every storey you are showing, not just the active one. A curved wall is measured along its actual arc, so a box that only reaches into the hollow of the curve leaves it alone. In a view with a crop, in a plan, section, elevation or callout, a box only picks what the crop leaves visible. Choosing Select also leaves any drawing tool. In the Render view the rail is shown unavailable with a not-allowed cursor and Select can't be used.

Where one object stands inside another in plan, such as a railing in the opening a wall's profile cuts, a click picks the smaller one. Press Tab to move to the next object under the cursor, and again to come back.

Walk

  1. Open the tray's Walk row and click Walk at the top of it. It is available in plan, 3D and Split. Linea switches to the 3D view, locks the pointer to the canvas and puts you inside the model.
  2. Look around the building with the pointer. A pill at the bottom reads Esc to exit, and a reticle at the centre turns green over something you can interact with, such as a door or a lift.
  3. Press Esc to leave.

Walking also ends if the pointer lock is lost. To set where a walk begins for people you share the model with, place a spawn point; see Saving camera views.