Sun and shadows
The Shadows row sets the model's sun and how its shadows read. It's in Render view too.

To switch shadows on and tune them
Open Shadows, tick Shadows, and drag Lightness between -100 and +100 percent: plus lightens the shadows and minus darkens them. Drawing shadows are black and translucent (about 10 percent at 0, none at +100, 30 percent at -100), so the fills and linework beneath show through and two overlapping shadows darken together. On ground lets the building's shadow fall on the ground; Linea has no ground object of its own, so the shadow lands on an invisible ground plane wherever you haven't built ground, and switching On ground off removes only that. Shadows on faces and on terrain stay. To have ground, draw a face or use the terrain tools.
To place the sun
Under Sun, choose Bearing and set North offset and Height, or choose Date and time and set Date and Time; a readout shows what you've picked. Linea uses London until the Site row has a location.
To cast shadows on plans
Open the Plans group and choose From left or From right; it is Off until you do. The plan shadow is drawn the way an elevation or section shadow is, with the cut plane acting as an open roof: a wall or column that rises through the cut casts from the cut height, and anything below it (a worktop, a sofa, a low wall) casts from its own top, onto the floor and onto whatever is lower, at 45 degrees. Lightness is shared with the elevation and section shadows, and the plan shadow prints on sheets, PDF and DXF as they do. This replaces the old Furniture shadows checkbox in the Display row. Every drawing opens with Plans off until you choose a side. Trees and plants cast nothing, and a doorway leaves a gap in a wall's shadow while a window's wall casts only from its sill down.
To cast shadows on elevations and sections
Every group in the row folds shut with the arrow beside its title. Choose From left or From right under Elevations and sections. Off removes them.
To give one camera its own light
The line at the top of the row tells you whose shadows you're editing, the model's or a camera's. A camera that keeps its own shadows has a Use the model's shadows button that hands it back to the model's.