Scaling and flipping

Scale resizes massing and Flip mirrors a selection. Use either in plan, in 3D or from either pane of split view; the tool keeps the view you opened.

In a section, elevation or either kind of callout, the selection is drawn at its live size or reflected position while you drag. Release applies that preview as one undo step; Escape restores the selection.

With Scale armed on a library item, an imported mesh or a closed group in a section or an elevation, the selection shows a box with a grip on each corner and each side, the same box and grips plan gives it. A corner scales it evenly; the left and right grips stretch it along the drawing, and the top and bottom grips change its height. Drag a grip or type a factor. A closed group of items takes one factor on every side, so its members move apart or together. Flip shows two grips on the box: the one on the right edge mirrors the selection left to right and the one on the top edge turns it upside down, each about its own centre, and one Undo puts either back. When drawn lines are in the selection, only the corners are offered.

During a pink outline sketch, Scale shows a box with a handle on each side and each corner around the picked edges, and Flip shows two mirror lines through their centre. Drag a side handle to resize along one axis, a corner to resize evenly, or click a mirror line to flip; Escape during a drag puts the outline back.

Scale works on massing: masses and their faces, loose model lines, and groups or components made of them. Select one of those and drag a handle, or type a factor. A selection that mixes massing with a wall, door, floor, roof or other parametric object scales the massing and leaves the rest as it stands, with a message saying so. Parametric objects keep their own sizes, set in their properties.

In a house turned on the site, the handle box of Scale (and the planes of Flip) stand along the house's own red and green, the same ones Move's arrows use, so pulling the red face handle stretches along the walls and never shears the mass.

A face's boundary edges scale and flip with it. This includes changes of height and faces inside a group or component.

You can also arm Scale or Flip with nothing selected, then click the object to work on in plan or 3D. A closed group or component is picked as a whole; enter it first to pick its parts. Ctrl-click adds an object, Shift-click adds or removes it and Alt-click removes it.

During a floor, ceiling, roof, pad, platform or terrain perimeter outline, Scale resizes the pink loop's selected edges about their centre as you drag, or by a factor you type, and Flip mirrors the selected edges about their centre, left to right; hold Shift for top to bottom. Copy arms Move with a copy, keeping the originals. Align takes a reference edge, then a parallel target edge and moves it square to the reference, stretching its neighbours. Eraser removes the edges you sweep through, in one undo step. Mirror takes an axis edge and copies by default; hold Alt to move instead. The outline stays open.

A hosted door or window mirrors within its wall. Mirroring across the wall run swaps the hinge and reflects its position along the wall; mirroring across the wall’s own plane changes the side it faces. A diagonal plane that would pull it off its host is refused.

In a section, an elevation or a callout window, Flip and Scale work on what the view holds, drafted lines and model pieces alike. Flip mirrors the selection in place, about a line fixed through its own centre: a ghost of the flip follows the pointer with a dashed line marking the axis, and one click anywhere makes it. Models and drafted lines in the same selection flip about one shared centre. The pointer position makes no difference to the result. Hold Shift to flip it top to bottom instead, and the ghost swaps at once. A wall or other fixed part that cannot stand upside down refuses by name, and nothing is changed. Scale takes three clicks: the base, a reference point, then the new size, or type a factor after the reference. A ghost of the result follows the pointer. Masses, faces and loose model lines scale in every direction. Drafted lines, hatches, repeats and detail components scale too; a detail component scales like a mass, so only that placement changes size and every other placement of its type keeps its own. A wall or other parametric object selected with drafted lines stays as it stands while the lines scale, and a message says so.

In plan, the Scale box spans everything you selected, walls and doors included; the massing scales and the rest stays put, with a message saying so. Click a grip without dragging and it stays with the pointer until your next click places it; press and drag still works. Beside the Flip planes there is a mirror-line button: click it, then click two points to draw the line the selection mirrors about. Both points snap, a ghost follows, and Esc cancels.

In plan, hovering a Flip plane through a mass shows a ghost of the mirrored result before you click; it goes when you move off the plane, click it or press Esc. A corner handle of Scale that lands on a snap point, such as the end of a wall, takes the mass to that point on both axes at once.

To scale

  1. Select something and click Scale.
  2. Drag a handle to scale from the opposite side, or type a factor, or a size such as 2m.

To flip

  1. Select something and click Flip.
  2. Click a plane through the selection to mirror it about that axis.

A closed group scales and flips as a single object. Both act on the storey the selection stands on, whichever level is active. Select the building to move, rotate, scale or flip every storey and its contents together, including attached drawings. A building scales uniformly, keeping its proportions. A group that holds walls, floors, roofs or other parts of a building scales by one factor, the same in every direction. Distances scale: walls get longer or shorter, floors and roof spans follow, the spacing between parts follows, and doors and windows keep their place along each wall in proportion.

A group sits inside a storey and the storeys do not scale with it: a wall whose top follows its storey, a roof or another wall keeps following it, so its height holds and its top still meets what it met, and only a wall with a fixed height scales its height and the lift of its base. A roof standing on the wall tops stays seated on them, its base following the wall tops, while a roof segment's own wall height holds. Doors and windows keep their size, sill height and depth, and only their place along the wall scales, so a fixed-height wall that would drop below the head of one of its openings refuses the scale and says why. A scale in plan alone, such as scaling the group together with other things in plan, holds every height. The house scales live as you drag, and the scale cage follows it once you let go. A roof outside the group that its walls are attached to goes with them: it moves and resizes with the walls and keeps its height, while a roof nothing in the group is attached to is left alone.

Things with a real size keep it: wall thickness, the layers inside a wall, door and window sizes, furniture and text height. An elevation or section line inside the group scales with it. A group that has itself been stretched along one axis is refused by name. For such a group the edge and face handles scale it evenly instead of stretching it along one axis, and typing two different factors is refused with a message that names what is inside. A wall outside the group that met a wall inside it stays exactly as it was; once the inside wall has moved, the two no longer share a corner. A group of masses and linework can still be stretched along one axis.

Flip takes a face or edge you have picked along with the rest of the selection and mirrors them all across the same plane. A face that sits square to that plane, such as the end wall of a mass, simply crosses over with the rest. The horizontal plane does the same: a picked face or edge turns over about the middle height of the whole selection, in the same step. If mirroring a picked face would fold the mass, on any plane, nothing moves and the face is flagged. A face picked on a mass that is itself selected adds nothing, because the whole mass flips once. A face or edge picked on its own flips the whole mass it belongs to.

Flipping a wall that hosts anything (doors, windows, wall-mounted items), or a wall whose two faces are not told apart as inside and outside, also reverses the direction it runs: its start and end change places, so any distance measured From start is now measured from the other end. Each door and window stays where it physically was in the mirrored building and keeps the side it faces (Flip Side) and its swing direction as they read. A door's hinge side, a sliding door's direction, stack and fixed panes, handles and side lights, and a window's hinge side, panes and pane openers are mirrored with it. The face that was outside before the flip is still outside afterwards, so the cladding stays on the outer face and Flip interior / exterior is left as you set it. A curtain wall that hosts anything does the same, and a curtain wall filling an opening in a flipped wall is re-fitted to the opening from the other end. A wall you did not select that follows a corner the flip moved keeps its openings at the same distance from the end that did not move.

Plan has a Scale handle at each corner and edge midpoint. In 3D the selection also has height handles at its corners, edges and face centres. A handle wears the colours of the axes it scales (a corner, which scales all three together, is amber), keeps the same size on screen however far you zoom, and your pointer shows the direction it scales in.

To scale along one axis only, grab a corner handle and tap an arrow key while you drag: Arrow Right for red, Arrow Left for green and, in 3D, Arrow Up for the vertical. Without a key, a corner handle dragged towards the red or green line through the opposite corner catches that line in plan, scales along it only and shows the dashed guide; Alt or a point snap takes precedence. See Axis locks.

If any element in the selection is locked, the scale handles do not appear; unlock it or take it out of the selection.

A locked object, or one inside a locked group, shows no Scale handles and no Flip arrows; it stays selectable. The same holds when you have picked only a face or an edge of a locked mass.