Starting a model
Everything you draw lives in a project, and Linea saves it as you go. Here's how to start one and what to fill in first.

- Open Linea. Your projects appear as a grid in the lobby, and the dashed New project tile is always first.
- Click New project, type its name and press Enter. You land inside the new project.
- Click Add site slot for the site (usually one, though you can add more) and Add building slot for each building or building type. Click a slot to open it. Site slots are always listed first, ahead of the building slots, and a slot's menu moves it up or down among the slots of its own kind. Inside a drawing you can add the same slots from the File menu, with New site slot and New building slot; the confirmation has an Undo that removes the slot again.
- Open the Project modal from the menu bar and fill in Project, Client, Drawn by and Checked by on the Details tab. (A project always keeps a name: clear the field and the old one comes back. If the details will not load, the modal says so and offers Retry.)
Those details belong to the project, not the slot: set them once and they flow onto the title block of every sheet in every slot. Paper size, scale, date and drawing number stay on the sheet itself. The starter Elevations page shows the North, South, East and West elevations, each linked to its marker outside the house and looking towards it. Section AA has its own page.
The lobby
The desktop lobby follows your Toolbars Light/Dark choice. In an open drawing, use Display > Canvas > Appearance > Toolbars in the menu bar to change it. The canvas appearance is independent.
The lobby lists your projects, pinned ones first. The header has a Search projects box (it matches a project's name or the name of any slot inside it; in a narrower window it moves to the top of the grid), a Sort projects control (Last edited, Name A–Z or Created) and an Import button for bringing a file in straight away. If the project list will not load, a message offers Retry. Slot thumbnails use flat solid faces with edges, without ambient occlusion, shadows or render effects. An open slot refreshes its picture after edits and changes to the site or neighbours it shows; returning to the lobby uses the latest capture immediately. Each project card shows a picture of the project (the site when it has anything in it, otherwise the building), how many slots of each kind it holds, for example 1 site, 2 building, and has a menu with Open, Pin, Rename, Project details and Delete. Delete always asks first: the question names the project and every slot that goes with it, and says where a building type stands on a site slot's plots, that those placements go too. The question reads the current slots and names each building with its site (for example, Type A on Site 1). If the list of slots changes before deletion, it asks again. The project and its slots are deleted together: if deletion fails, they all stay available. Cancel deletes nothing; confirm and the project goes with its named slots, and a toast offers to restore it for a few seconds.
Inside a project
Opening a project shows its slots in the same space, with a Back to projects button beside Import that takes you back to the projects grid. Each slot card is marked Site or Building, and a building slot lists its building types under its name. A slot's menu has Open, Rename, Duplicate, Move up, Move down and Delete. Open Project in the tool's menu bar to set the project name, number, client, address, initials and practice details. The project card's Project details menu opens the same fields from the lobby. Slots stay in the project's own order, so Sort projects is not offered inside a project. Import inside a project asks whether the file is a site slot or a building slot and adds it to that project. Deleting a building slot that stands on plots asks first, naming the plots that lose it; once you confirm, its building types come off every plot of the project and the plots stay, empty.
A model made while you are working in a project on your Projects page belongs to that project, and the project is where its Client, Site address and Project number are kept. The Details tab shows them read-only, with the project's site constraints (a listed building, a flood zone and so on) beneath, and Edit on the project opens the project to change them; the title block prints whatever the project holds. A model that is not part of a project keeps every field editable here. While Linea is still checking whether a model belongs to a project, those three fields wait and print blank on a sheet; if the check cannot be made, the tray says so and offers Try again.
A file you attach as a reference is contained within the model. Open the model and use the References row in the tray to manage it. Attached references do not appear in the lobby or get slot cards of their own.
Switching between a site and its buildings
You do not need the lobby to move around a project. At the top of the Project modal, opened from the menu bar, a site slot lists the building slots linked to it and a building slot lists its site and the other buildings on that site, each with an Open button. Linea saves your drawing first, then opens the slot you chose. A drawing that is not in a project, or a slot with nothing linked yet, says so instead of listing anything.
Every drawing is in a project
A drawing always belongs to a project. New project makes one called Untitled project and opens it so you can name it and add its slots, and Import from the lobby asks which project the file goes into, a new one or one you already have, and whether it is a site slot or a building slot.
Saving
Linea autosaves about a second after you stop changing things, and the title bar reads Saved, Saving… or Unsaved changes as it goes. If you want a copy as a file on your own machine, see Saving, opening and copies. Opening a drawing never saves it: nothing is written until you make a change yourself, and an undo or redo counts as a change. An edit made just before a tab closes is also kept on this device, and offered back the next time you open that drawing. The question says how many objects that edit has and how many the saved version has, and when restoring would replace much more than it brings back, Keep saved version is the prominent choice. Restore my edit keeps a copy of the saved version first. Linea also keeps several earlier copies of each drawing on the server, so a bad save can be put right from the lobby.
Earlier saved copies
Linea keeps earlier copies of each drawing on the server: about every 15 minutes while you work, before a save that would remove most of a drawing, and before a restore. To see them, open the ... menu on a drawing's card in the lobby and choose Saved copies. The list runs newest first and gives when each copy was kept, why, and how many objects it held, with how many the drawing holds now at the top. Restore asks first, tells you how many objects it replaces and brings back, and keeps the drawing as it stands as a copy before replacing it, so a restore can be undone from the same list. If copies cannot be read just now the dialog says so and your drawing is untouched. Without an active plan you can look at the list, but restoring needs one.